Manual Directed Electronics 425 (page 14 of 28) (English)

583960

Zoom out

Zoom in

1/28

1999 Directed Electronics, Inc.

To enter or exit Valet Mode with

the Valet switch:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet switch

within 10 seconds.

The status LED will light steadily if you are entering Valet Mode

and will turn off if you are exiting Valet Mode.

You can also activate Valet Mode with the remote transmitter:

1. Open any vehicle door.

2. Press .

3. Press .

4. Press again.

The status LED will light solid if you are entering Valet Mode and

will turn off if you are exiting Valet Mode.

Your system has Nuisance Prevention

Circuitry (NPC

™

) to prevent

annoying repetitive trigger sequences caused by faulty door pin

switches or environmental conditions such as thunder, jackham-

mers, airport noise, etc.

Here’s how it works: If the alarm is triggered by the same sensor or

switch three times within a 60 minute period, your system inter-

prets this pattern of triggers as false alarms. After the third trigger,

Nuisance Prevention

Circuitry

Remote Valet

DRW-35

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 425 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 425 Manual

Product: