Manual Directed Electronics 425 (page 12 of 28) (English)

583960

Zoom out

Zoom in

1/28

1999 Directed Electronics, Inc.

Press to disarm the security system and unlock the doors (if

connected). Disarming is confirmed when the parking lights flash

twice and the siren emits two chirps. The siren chirping either four

or five times when disarming indicates Tamper Alert, which is de-

scribed in the Diagnostics section of this manual.

This feature allows you to disarm the system without the remote trans-

mitter, in the event that the transmitter is lost, damaged or disabled.

To disarm the system without a remote transmitter, you must have

the vehicle’s ignition key and know where the Valet switch is located.

Be sure to check with your installer at the time of installation for

both the location and the preset response (1-5 presses) of the

Valet switch.

To disarm the system, turn the ignition

key on and press the Valet switch the

preset number of times within 15 sec-

onds. If the system does not disarm,

you may have waited too long; turn

the ignition off and repeat the process.

IMPORTANT: The Valet switch can be programmed to respond to 1-5

presses for the disarm function. You must check with the installer to ver-

ify the programming for your individual unit.

LOCATION OF VALET SWITCH_____________________________

DRW-35

Disarming Without a Transmitter

Disarming

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 425 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 425 Manual

Product: