Information requirements for heat pump space heaters and heat pump combination heaters
ItemSymbolValueUnitItemSymbolValue
Unit
Tj = - 7°C
Pdh107,4kWTj = - 7°CCOPd3,92-
Tj = + 2°C
Pdh111,3kWTj = + 2°CCOPd4,60-
Tj = + 7°C
Pdh113,6kWTj = + 7°CCOPd5,11-
Tj = + 12°C
Pdh116,0kWTj = + 12°CCOPd5,73-
Tj = bivalent temperature
Pdh106,3kWTj = bivalent temperatureCOPd3,75-
Tj = operation limit temperature
Pdh106,3kWTj = operation limit temperature COPd3,75-
For air-to-water heat pumps
For air-to-water heat pumps:
Tj = -15°C (if TOL < -20°C)
Pdh106,3kWTj = -15°C (if TOL < -20°C)COPd3,75-
Bivalent temperature
Tbiv-10°C
For air-to-water heat pumps:
Operation limit temperature
TOL-10°C
Cycling interval capacity for heating
Pcych-kW
Cycling interval efficiencyCOPcyc--
Degradation co-efficient (**)
Cdh0,90-
Heating water operating limit
temperature
WTOL60°C
Power consumption in modes other than active mode
Supplementary heater
Off mode
POFF0,015kWRated heat output (*)Psup0kW
Thermostat-off mode
PTO0,020kWType of energy inputeletrical
Standby mode
PSB0,015kW
Crankcase heater modePCK0,180kW
Other items
Capacity control
fixed-11600
m³ /h
Sound power level, indoors/ outdoors
LWA73dB--
m³ /h
Emissions of nitrogen oxides
NOx-mg/kWh
Declared load profile
-Water heating energy efficiencyηwh-%
Daily electricity consumption
Qelec-kWhDaily fuel consumptionQfuel-
kWh
Contact details
(**) If Cdh is not determined by measurement nthen the default degradation is Cdh = 0,9
(--) not applicable
For air-to-water heat pumps: Rated
air flow rate, outdoors
For water-/brine-to-water heat
pumps: Rated brine or water flow
rate, outdoor heat exchanger
Declared capacity for heating foer part load at indoor temperature 20°C and
outdoor temperature Tj
Declared coefficient of performance or primary energy ratio for part load at
indoor temperature 20 °C and outdoor temperature Tj
For heat pump combination heater:
Glen Dimplex Deutschland GmbH, Am Goldenen Feld 18, 95326 Kulmbach
(*) For heat pump space heaters and heat pump combination heaters, the rated output Prated is equal to the design load for heating Pdesignh, and the rated
heat output of a supplementary capacity for heating sup(Tj).
176
%
Heat pump combination heater
no
Parameters shall be declared for medium-temperature application, except for low-temperature heat pumps. For low- temperature heat pumps, parameters
shall be declared for low-temperature application.
Rated heat output (*)
Prated
106kW
Seasonal space heating energy
efficiency
ηs
Parameters shall be declared for average climate conditions:
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Dimplex WI 120TU at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Dimplex WI 120TU in the language / languages: English, German, French as an attachment in your email.
The manual is 1.97 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
