9.1Heat output / coefficient of performance (COP)58EN 14511
Performance level12
at W10 / W55 kW / ---49.6 / 3.5106.3 / 3.8
at W10 / W45 kW / ---57.5 / 4.9111.6 / 4.7
at W10 / W35 kW / ---64.3 / 6.9117.4 / 6.1
1.Operating limits must be observed in the project planning stage. For detailed information, see the operating limits diagram. Operating restrictions are to be expected in the
event of non-compliance.
The intended use is within the operating limits shown. The heat pump is optimised for the application of space heating in accordance with EN14825. For projects involving
continuous operation with heat-source infeed temperatures of greater than +17°C, the operating limits shown are to be complied with using downstream hydraulic equipment,
for example.
2.Tonal component according to DIN 45681 Table 1 is 4 dB
3.The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation at 55°C flow temperature.
The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16dB(A), depending on the installation location.
4.Note that additional space is required for pipe connections, operation and maintenance.
5.These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, the bivalence point and
regulation should be taken into consideration. These specifications can only be achieved with clean heat exchangers. Information on maintenance, commissioning and oper-
ation can be found in the respective sections of the installation and operating instructions. The specified values, e.g. W10 / W55, have the following meaning: Heat source
temperature 10°C and heating water flow temperature 55°C.
6.See CE declaration of conformity
7.The heat circulating pump and the heat pump manager must always be ready for operation.
8.The coefficients of performance are valid with the circulating pumps included in the scope of supply.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Dimplex WI 120TU at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Dimplex WI 120TU in the language / languages: English, German, French as an attachment in your email.
The manual is 1.97 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
