Manual Dimplex WI 10TU (page 29 of 72) (English, German, French)

520403

Zoom out

Zoom in

1/72

www.glendimplex.de 452235.66.21a · FD 0106 EN-11

WI 10TU - WI 22TU English

Type and order code WI 18TU WI 22TU

1 Design

Heat source Water Water

1.1 model Universal Universal

1.2 Contr. WPM EconPlus WPM EconPlus

1.3 Thermal energy metering Integrated Integrated

1.4 Installation location Indoors Indoors

1.5 Performance levels 1 1

2 Operating limits

2.1 Heating water flow °C 20 to 62 ± 2 20 to 62 ± 2

2.2 Cold water (heat source) °C +7 to +25 +7 to +25

3Flow / sound

3.1 Heating water flow at internal pressure differential

Nominal flow according to EN14511 at W10-7 / W35-30 m³/h / Pa

at W10-7 / W45-40 m³/h / Pa

at W10-7 / W55-47 m³/h / Pa

Minimum heating water flow m³/h / Pa

2.9 / 16200

2.7 / 14100

1.6 / 5100

3.8 / 22900

3.6 / 20700

2.2 / 7700

3.2 Cold water flow at internal pressure differential

Nominal flow according to EN14511 at W10-7 / W35-30 m³/h / Pa

at W10-7 / W45-40 m³/h / Pa

at W10-7 / W55-47 m³/h / Pa

Minimum cold water flow m³/h / Pa

4.0 / 15200

3.4 / 11200

3.3 / 10500

5.3 / 21400

4.7 / 17100

4.0 / 12100

3.3 Sound power level according to EN 121021dB(A)

1. The specified sound levels apply if the supporting feet (available as an option) are not used. If the supporting feet are used, the level can deviate by up to 3dB(A).

44 47

3.4 Sound pressure level at a distance of 1 m2 1dB(A)

2. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35 °C.

The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.

32 35

4 Dimensions, connections and weight

4.1 Device dimensions 3H x W x D mm

3. Please note that additional space is required for pipe connections, operation and maintenance.

840  650 x 655 840  650 x 655

4.2 Weight of the transportable unit(s) incl. Packaging/full kg 160 179

4.3 Device connections for heating system Inches 4

4. Flat-sealing

Thread 1¼" external Thread 1¼" external

4.4 Device connections for heat source Inches 4Thread 1¼" external Thread 1½" external

4.5 Refrigeran / total filling weight type/kg R410A/3.4 R410A / 4.0

4.6 GWP value / CO2 equivalent --- / t 2088 / 7 2088 / 8

4.7 Refrigeration circuit hermetically sealed yes yes

4.8 Lubricant / total filling quantity type/litres Polyolester (POE)/1.2 Polyolester (POE) / 1.9

4.9 Volume of heating water in device Litres 4.5 5.6

4.10 Volume of heat transfer medium in device Litres 2.9 3.3

5 Electrical connection

5.1 Supply voltage / fuse protection Compressor

Primary circulating pump

Joint supply

Compressor and primary circulating pump

3~/PE 400 V (50 Hz) / C13 A

3~/PE 400 V (50 Hz) / C10 A

3~/PE 400 V (50 Hz) / C13 A

3~/PE 400 V (50 Hz) / C16 A

3~/PE 400 V (50 Hz) / C10 A

3~/PE 400 V (50 Hz) / C16 A

5.2 Control voltage / fuse protection 1~/N/PE 230 V (50 Hz) / C13 A 1~/N/PE 230 V (50 Hz) / C13 A

5.3 Degree of protection according to EN 60 529 IP 21 IP 21

5.4 Starting current with soft starter A 23 28

5.5 Nominal power consumption W10/W35/max. consumption5kW

5. These data indicate the size and capacity of the system according to EN 14511. For an analysis of the economic and energy efficiency of the system, the bivalence point and

regulation should be taken into consideration. These specifications can only be achieved with clean heat exchangers. Information on maintenance, commissioning and oper-

ation can be found in the respective sections of the installation and operating instructions. The specified values, e.g. W10 / W35, have the following meaning: Heat source

temperature 10 °C and heating water flow temperature 35 °C.

2.95 / 5.4 3.91/ 7.2

5.6 Nominal current W10/W35/cos A / -- 5.32 / 0.8 7.06 / 0.8

5.7 Power consumption of compressor protection (per compressor) W thermostatically controlled thermostatically controlled

6 Complies with the European safety regulations 6

6. See CE declaration of conformity

7 Additional model features

7.1 Water in device is protected against freezing 7

7. The heat circulating pump and the heat pump manager must always be ready for operation.

Yes Yes

7.2 Max. operating overpressure (heat source/heat sink) bar 3.0 3.0

8 Heat output / COP 5

Heat output / COP EN 14511 EN 14511

Performance level 1 2 12

at W10 / W55 kW / --- 15.1 / 3.6 20.0 / 3.6

at W10 / W45 kW / --- 15.6 / 4.4 21.1/ 4.4

at W10 / W35 kW / --- 17.1 / 5.8 22.3 / 5.7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex WI 10TU in the language / languages: English, German, French as an attachment in your email.

The manual is 2.07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dimplex WI 10TU

Dimplex WI 10TU Usermanual and installation guide - Dutch - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dimplex WI 10TU Manual

Product: