520403
28
Zoom out
Zoom in
Previous page
1/72
Next page
EN-10 452235.66.21a · FD 0106 www.glendimplex.de
English WI 10TU - WI 22TU
12 Device Information
1 Type and order code WI 10TU WI 14TU
2 Design
2.1 Model Universal Universal
2.2 Controller internal internal
2.3 Thermal energy metering Integrated Integrated
2.4 Installation location / degree of protection according to EN 60 529 Indoors / IP 21 Indoors / IP 21
2.5 Performance levels 11
3 Operating limits
3.1 Heating water flow °C 20 up to 62 ± 2 20 up to 62 ± 2
3.2 Cold water (heat source) °C +7 to +25 +7 to +25
4 Performance data / flow rate
4.1 Heating water flow at internal pressure differential
maximum (EN14511) m³/h/P
minimum m³/h/P
1.7 / 5000
0.9 / 1400
2.3/ 8000
1.1 / 1900
4.2 Cold water flow at internal pressure differential
minimum m³/h/Pa 2.2 / 6200 3.1 / 9200
4.3 Heat output / COP 1
1. These data indicate the size and capacity of the system according to EN14511. For an analysis of the economic and energy efficiency of the system, both the bivalence point
and the regulation should be taken into consideration.
The specified values, e.g. W10 / W55, have the following meaning: Heat source temperature 10 °C and heating water flow temperature 55 °C.
These specifications can only be achieved with clean heat exchangers.
Information on maintenance, commissioning and operation can be found in the respective sections of the installation and operating instructions.
EN14511 EN14511
at W10/W55 kW/--- 8.4 / 3.2 11.5 / 3.3
at W10/W45 kW/--- 9.1 / 4.3 12.2 / 4.4
at W10/W35 kW/--- 9.6 / 5.9 13.3 / 6.1
4.4 Sound power level2dB(A)
2. The specified sound levels apply if the supporting feet (available as an option) are not used. If the supporting feet are used, the level can increase by up to 3db (A).
41 43
4.5 Sound pressure level at a distance of 1 m3 2dB(A)
3. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35 °C. The specified sound pressure
level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
30 31
5 Dimensions / weight and filling quantities
5.1 Device dimensions without connections 4H x W x L mm
4. Note that additional space is required for pipe connections, operation and maintenance.
840 x 650 x 655 840 x 650 x 655
5.2 Device connections for heating system Inch G 1 1/4“ external thread5
5. flat-sealing
G 1 1/4“ external thread5
5.3 Device connections for heat source Inches G 1 1/4“ external thread5G 1 1/4“ external thread5
5.4 Weight of the transportable unit(s) incl. packaging kg 142 151
5.5 Refrigerant / total filling weight type/kg R410A / 2.7 R410A / 3.3
5.6 GWP value / CO2 equivalent --- / t 2088 / 6 2088 / 7
5.7 Refrigeration circuit hermetically sealed yes yes
5.8 Lubricant / total filling quantity type/litres Polyolester (POE) / 1.2 Polyolester (POE)/1.2
6 Electrical connection
6.1 Supply voltage / fuse protection
Compressor
Primary circulating pump
shared feed compressor + primary circulating pump
3~/PE 400 V (50Hz) ; C10 A
3~/PE 400 V (50Hz) ; C10 A
3~/PE 400 V (50Hz) ; C10 A
3~/PE 400 V (50Hz) ; C10 A
3~/PE 400 V (50Hz) ; C10 A
3~/PE 400 V (50Hz) ; C10 A
6.2 Control voltage / fuse protection 1~/N/PE 230 V (50Hz) ; C13 A 1~/N/PE 230 V (50Hz) ; C13 A
6.3 Starting current with soft starter A 17 20
6.4 Nominal power consumption W10/W35/max. consumption1kW 1.63 / 3.2 2.18 / 4.3
6.5 Nominal current W10/W35/cos A/--- 2.94 / 0.8 3.93 / 0.8
7 Complies with the European safety regulations 6
6. See CE declaration of conformity
6
8 Additional model features
8.1 Water in device is protected against freezing 7
7. The heat circulating pump and the heat pump manager must always be ready for operation.
yes yes
8.2 Max. operating overpressure (heat source/heat sink) bar 3.0 3.0
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex WI 10TU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex WI 10TU in the language / languages: English, German, French as an attachment in your email.

The manual is 2.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dimplex WI 10TU

Dimplex WI 10TU Usermanual and installation guide - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info