798190
6
Zoom out
Zoom in
Previous page
1/24
Next page
6
3.Build the finished wall up against the appliance using the glass trims as a guide. The finished
wall should be built in a way that allows the power supply to be accessible after installation.
It is recommended to leave 150mm of clearance area directly above the product for ventilation
purposes. (Fig. 12) This clearance area can be located behind the finished wall surface.
The product should not be sealed in place with silicone or adhesive as this can restrict airflow.
Step 4: Fuelbed Assembly
A range of fuel bed material has been provided for you to choose your desired look.
A set of high-quality ceramic logs enhance the eect of this fire. Please take great care when handling
these logs to ensure they do not get dropped or rub against each other, as they are easily marked.
The following fuel bed media is included
Ceramic Logs
Ash Dust
Crystal pieces
We have taken great care to create what we feel is the most authentic fuel bed, please follow the
steps below for more information. Please note: A mix and match of fuelbed media can also be
done to create unique fuel bed assembly.
1. Remove front trim on unit. (Fig. 2)
2. Remove Front Glass from product and store in a safe place. (A suction cup is provided to help
remove/place the front glass.) (Fig. 6)
3. For a contemporary setup (Fig.14), place crystals on fuel bed, covering the top surface of the fuel
bed. These will provide a glowing embers eect, when the flame eect is operating.
4. For a traditional look, arrange the logs on top of the fuel bed, to your preference. Please follow
the steps at the end of this document which provide a visual representation for log arrangement.
Ash dust is also supplied for this setup. Sprinkle this across the fuel bed to produce a realistic
log burning eect.
5. Reverse steps 1 and 2 to re-assemble product.
Operation and Use
WARNING: Failure to follow these operating instructions may result in injury and/or damage.
Thank you for choosing the Vivente. We hope you enjoy using your new electric fire. Please take
a few minutes to read these instructions. This will help you understand and benefit from all of the
following features:
Onboard controls
Remote control
App control
Heating – including “Comfort$aver”
Flame eects
SmartSense
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex Vivente VVT75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex Vivente VVT75 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dimplex Vivente VVT75

Dimplex Vivente VVT75 User Manual - Dutch, Danish, Polish, Turkish, Norwegian - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info