798316

Dimplex LI 20TES Manual

27
Zoom out
Zoom in
Previous page
1/76
Next page
www.gdts.one 452161.66.22 · FD 9912 EN-7
LI 20TES - LI 28TES English
The values in parentheses are valid for the LI 24TES/ LI 28TES
7.2.2 Changing the direction of air flow
The direction of air flow of the device can be changed by re-
versing the fan.
The change in the air circuit must be taken into account when
planning the plant. The specifications for the air intake and air
extract opening in this manual remain unchanged.
ATTENTION!
!
!
Before opening the device, ensure that all circuits are isolated
from the power supply.
ATTENTION!
!!
Work on the heat pump may only be carried out by authorised
and qualified after-sales service technicians.
To do this:
1) Remove the front panels from the bottom to the top.
2) Open the fan terminal box and disconnect the supply ca-
ble.
3) Pull the supply cable inwards through the terminal box and
nozzle panel.
4) Loosen the nut and washers on the four corners of the fan.
5) Pull the fan gently inside the device and pull it out through
the front of the device. Protect evaporators from damage.
6) Pull out the spacer tube from the mounting bolts at the
four corners.
7) Cut out a square in the device insulation on the right air
vent opening along the existing perforation so it matches
the left side.
8) Insert the fan with reverse direction of air flow back into the
device from the front and insert onto the screws on the
right. Check the position of the cable entry. Protect evapo-
rators from damage.
9) Insert the spacer tube onto the mounting bolts and tighten
the fan with the washers and nuts at the four corners.
10) Feed the cable as illustrated through the nozzle panel and
terminal box and tighten the screws.
11) Connect the cables in the terminal box of the fan (see dia-
gram for connection, comply with clockwise field of rota-
tion) and screw on the terminal box lid.
12) Ensure that there are no leaks in the terminal box and all
cable glands.
13) Screw on the panels.
(min.725)
min.650
M8x 16
(max.805)
max.730
(785)
710
3.
4.
5.
4x
8.
9.
10..
4x
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex LI 20TES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex LI 20TES in the language / languages: English, German, French as an attachment in your email.

The manual is 2.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info