798083
7
Zoom out
Zoom in
Previous page
1/16
Next page
www.dimplex.eu 2205/B EN-4
IRP – Infra-red heating English
5. Faults
If the heating device is not emitting any heat, check
the temperature setting on the room thermostat, then
check whether the fuse in the electricity distribution is
switched on.
For your safety, the heating device is equipped with
an integrated overload protector. The device switches
off automatically in the case of impermissible heating
of the heating device (e.g. due to it being hung or po-
sitioned incorrectly).
Before recommissioning, remove the causes behind
the overload protector being triggered.
Once the device has cooled down sufficiently, the
overload protector switches off again automatically
and the device can be operated again.
If you cannot correct the fault, please contact a spe-
cialist electrical service centre or else the service cen-
tre for Dimplex devices. Please have the E-number
printed on the type plate ready.
6. Cleaning
The device must be switched off and must have
cooled down before cleaning. Set the room thermo-
stat to OFF. Clean the outside of the device using a
soft hand brush.
Do not use any fluid, scouring powder or other chem-
icals, as they could damage the surface.
7. Warranty
This product is supplied with a five-year warranty ac-
cording to our terms of guarantee.
8. Note on disposal
Do not dispose of the device with general
household waste. The device must be taken to
a local waste disposal plant.
9. Technical data
Glen Dimplex Deutschland GmbH Tel.: +49 9221 709 700
Am Goldenen Feld 18 Fax.: +49 9221 709 701
D - 95326 Kulmbach E-mail: elektroheizung@dimplex.de
Device type IRP 300W IRP 600W IRP 850W
Nominal voltage 1/N/PE, 230 - 240 V~
Degree of protection IP44, splash-proof
Dimensions (W x H x D) 592 x 592
x 30 mm
1192 x
592 x 30
mm
1192 x
800 x 30
mm
Weight 5 kg 9 kg 12 kg
Heat output
Nominal heat out-
put
P
nom
0.30 kW 0.60 kW 0.85 kW
Minimum heat
output (guide
value)
P
min
0.30 kW 0.60 kW 0.85 kW
Maximum contin-
uous heat output
P
max, C
0.30 kW 0.60 kW 0.85 kW
Self consumption
With nominal
heat output
el
max
0.00 W 0.00 W 0.00 W
With minimum
heat output
el
min
0.00 W 0.00 W 0.00 W
In standby state el
SB
0.00 W 0.00 W 0.00 W
Regulator for heat output
External electronic room temperature controllers with week pro-
gramme and adaptive control of the heating start, as well as other
energy saving functions where applicable.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex IRP300W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex IRP300W in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 0.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info