706337

Dimplex CAS 1000R Manual

13
Zoom out
Zoom in
Previous page
1/56
Next page
5
RECEIVER CONTROLS
The product can also be controlled using the receiver which is supplied with the product. (Fig 12)
CAS500R
• is the on/standby button. Press it to turn on and off the ame effect.
• is used to mute the re crackling sound. Press this to turn on and off the crackling sound. The volume can be
adjusted on the manual controls of the appliance. Please note that the mute setting will not be saved after a product
restart. The crackling sound can be turned off completely by using the volume control buttons on the button panel to
reduce the volume to its minimum setting. This minimum setting will be remembered after a product restart.
• is the reduce ame button. Press this to reduce the height/intensity of your ame. You will hear an audible beep
when you reach the minimum level.
• is the increase ame button. Press this to increase the height/intensity of your ame. You will hear an audible
beep when you reach the maximum level
CAS1000R
• is the on/standby button. Press it to turn on and off the ame effect.
• is used to mute the re crackling sound. Press this to turn on and off the crackling sound. The volume can be
adjusted on the manual controls of the appliance. Please note that the mute setting will not be saved after a product
restart. The crackling sound can be turned off completely by using the volume control buttons on the button panel to
reduce the volume to its minimum setting. This minimum setting will be remembered after a product restart.
• is the reduce ame button. Press the reduce ame button on the second button row to reduce the height/intensity
of the ame on the left hand side of the product. Press the reduce ame button on the third button row to reduce
the height/intensity of the ame on the right hand side of the product. You will hear an audible beep when you reach
the minimum level.
• is the increase ame button. Press the increase ame button on the second button row to increase the height/
intensity of the ame on the left hand side of the product. Press the increase ame button on the third button row to
increase the height/intensity of the ame on the right hand side of the product. You will hear an audible beep when
you reach the maximum level.
REMOTE CONTROL
The remote control is supplied with 2xAAA batteries. Remove the battery cover from the underside of the remote control
and after removing the batteries from the plastic wrapping t them into place. Replace the battery cover. With the product
powered off, a functional test can be carried out on the remote control by pushing any button and observing the blue LED
at the top o the remote ashing with each button push.
Pairing the Remote Control
The remote control has wireless Bluetooth technology and needs to be paired to the receiver. This can be done by
following the steps below.
1. Press the rocker switch to the on (I) position; a single beep will be heard.
2. Press the button on the Button Panel; the product will turn on.
3. Press the button on the Button Panel, the LED’s will start to slowly blink on and off.
4. Press the button on the remote control; the product LEDs will ash quickly three times and the product will then
automatically switch off. The remote control is now paired to the product and can be used to switch it back on.
The operation of the remote control is the same as described in ‘Receiver Controls’. You can pair multiple products to the
one remote control by repeating the pairing operation as above on your subsequent products. Please note a maximum
of six CAS500R/CAS1000R products can be paired to the one remote control.
Pairing the Remote Control to Multiple Products
If you are installing multiple CAS500R/CAS1000R products you can pair them to a single remote control. To do this,
please install the products as described in the “Installation Instructions”. Ensure that all products are connected to mains
power and have water supplied. If you are pairing CAS1000R and CAS500R products please choose the 6 button
remote control as the master remote control.
1. Pair the rst product as described in steps 1-4 above.
2. On your second product, press the rocker switch to the on (I) position; a single beep will be heard.
3. Press the button on the Button Panel; the product will turn on.
4. Press the button on the Button Panel, the LED’s will start to slowly blink on and off.
5. Press the button on the remote control; the LEDs will ash quickly three times and the product will then
automatically switch off. The remote control is now paired to the two products and can be used to switch them on.
6. Repeat the above steps to pair the next product.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex CAS 1000R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex CAS 1000R in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 10,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info