798081

Dimplex BK1202S Manual

7
Zoom out
Zoom in
Previous page
1/16
Next page
www.dimplex.de/en 1807/B EN-7
BK 1202 S, BS 1201 S English
6. Cleaning
Switch off the device and let it cool down before clean-
ing it.
Caution! Do not touch the reflector or heating element
with bare hands.
The outer surfaces of the device can be cleaned with a
damp cloth and then dried thoroughly.
No scouring agents or polishes should be used.
Dust which gathers inside the device can be removed
using a brush with soft, long bristles.
If the device is heavily soiled, it should be cleaned by a
specialist.
7. Faults
In the event of a fault, disconnect the device from the
power supply
If the heating device does not give off heat, check the
following points:
Is the display at “0”?
Is the fuse in the fuse box switched on?
If the fault cannot be corrected, please contact your
electrical retailer.
If necessary, you can also call the Glen Dimplex Ther-
mal Solutions Service Hotline.
Telephone: +49 (0) 9221 709-545
Facsimile: +49 (0) 9221 709-924545
Mail: service@gdts.one
To process your order, the device type and the device’s
production date (FD number) are required. These
specifications can be found on the device’s type plate.
NOTE
Repairs and corrective measures must only be carried
out by a qualified electrician or the after-sales service.
8. Spare parts
Ordering spare parts at Glen Dimplex Germany GmbH
on the Internet at:
www.dimplex.de/ersatzteile.html
9. Changing the heating element
A heating element may only be changed by a special-
ist. Disconnect the device from the power supply and
allow it to cool.
Do not touch the heating element or reflector with bare
hands. Use a cloth to protect the surface.
Loosen the front grill screws (A) and remove the
front grill.
Remove push-on connections using a suitable tool.
Pull out the two fixing brackets (B).
Remove the heating element.
Insert new heating element.
Carry out assembly in reverse order.
10. Warranty
This product is supplied with a two-year warranty ac-
cording to our warranty terms and conditions.
11. Note on disposal
Do not dispose of the unit with general house-
hold waste. The unit must be taken to a local
waste disposal plant.
12. Technical data
Glen Dimplex Deutschland GmbH Tel.: +49 9221 709 545
Am Goldenen Feld 18 Fax.: +49 9221 709 924 545
D - 95326 Kulmbach Email: service@gdts.one
Model reference BK 1202 S BS 1201 S
Nominal voltage 1/N/PE, 230 - 240 V~
Degree of protection IP24, splashproof
Dimensions (W x H x D) 768 x 100 x 92
mm 526 x 140 x 92
mm
Weight 1.6 kg 1.6 kg
Heat output
Nominal heat out-
put P
nom
1.2 kW 1.2 kW
Minimum heat
output (indicative) P
min
0.6 kW 0.6 kW
Maximum contin-
uous heat output P
max, C
1.2 kW 1.2 kW
Intrinsic consumption
At nominal heat
output el
max
0.0 W 0.0 W
At minimum heat
output el
min
0.0 W 0.0 W
In standby mode el
SB
0.0 W 0.0 W
Control for heat output
Two manual stages, no room temperature control
B
A
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex BK1202S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex BK1202S in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info