798081
6
Zoom out
Zoom in
Previous page
1/16
Next page
EN-6 1807/B www.dimplex.de/en
English BK 1202 S, BS 1201 S
The supply connection socket must be accessible after
installation.
Due to the heat radiation of the device, the surface on
which the device is installed can darken in colour.
NOTE
Installation on wooden walls is permissible.
Remove transport fastening
Loosen the front grill screws (A) and remove the
front grill.
Remove the transport fastenings (B) from the heat-
ing elements.
Re-attach the front grill.
3. Wall mounting
To achieve the stipulated minimum installation height
of 1.8 metres, the mounting holes for the wall holder
must be drilled at a height of 1.9 metres.
Loosen the screw on the connection compartment
cover and remove the cover.
Fold the radiator forward.
Mark and drill the mounting holes on a vertical wall
and insert dowels.
Insert spacers with screws into the openings of the
wall holder and screw the device into place.
4. Electrical connection
The voltage specified on the type plate must match the
mains voltage.
The installation of this heater must be carried out by a
competent electrician in accordance with the current
safety regulations. Heating device must be earthed!
Connection only to fixed installed cables!
The connecting wires of the power lines must be fitted
with a heat-resistant protective hose.
A separator with a minimum contact opening of 3mm
must be provided on each pole in the permanently con-
nected electrical installation (e.g. a circuit breaker).
It is recommended that a separate circuit be provided
for the power supply.
5. Operation
The desired heating level can
be set by pulling the cord switch
once or repeatedly.
The set heating level can be
read in the display window.
In position 0, the heating device
is switched off.
The radiator heats the objects or
persons upon which/whom it is
directed without also directly
heating the indoor air.
The radiator can be tilted down-
wards by a maximum of 40°.
ATTENTION!
Adjustments may only be made when the de-
vice is fully cooled. Danger of burns!
Power output in switch position
W = output power in watts.
A
A
B
B
255 mm
Display 0 Display 1 Display 1 Display 2
BK 1202 S
Off 600 W 600 W 1200 W
BS 1201 S
Off 600 W 600 W 1200 W
650 mm
40°
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex BK1202S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex BK1202S in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info