534680
64
Zoom out
Zoom in
Previous page
1/68
Next page
64 Troubleshooting
Dimension BST 768 / SST 768 User Guide
Figure 22: Removing the drive block assemblies to check for buildup
C. Set the drive block assembly on the material cartridge.
D. Remove the model drive block assembly the same way.
7. With the drive blocks removed, look through both filament
guide funnels for obstructions. If an obstruction is present,
clear the drive block obstruction:
A. Remove the filament guide funnel.
Use the 7/64” Allen wrench provided in the Startup Kit to
remove the filament-guide mounting screw as shown in
Figure 22.
B. Remove any excess material; use the needle-nose pliers if
necessary.
C. Replace the filament guide funnel.
8. With the drive blocks removed, inspect liquefier tube inlet area.
A. (For BST) Inspect the liquefier inlet tubes (see Figure 23).
CAUTION
Liquefier inlet tubes are fragile. Be
careful not to damage them when
removing material.
Drive Block Assembly
Mounting Screws
Drive Wheels
Filament Guide Funnel
and Mounting Screw
Support DriveModel Drive
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimension BST 768 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimension BST 768 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info