695358

Dik Geurts Lars 900 Manual

23
Zoom out
Zoom in
Previous page
1/64
Next page
English
USER MANUAL
!Tip
A steadily burning fire stimulates combustion.
Ø
Refill the fire before the flames have gone out of the fire. This will be approximately every 30 to 45 minutes.
Ø
Close the door and open the air supply slide all the way until the new wood blocks are burning well. See Table 2 for
the recommended quantities of wood.
Ø
Using the air supply slide, adjust the draught until a steady flame pattern is achieved.
Ø
Always allow the fire to burn empty when you stop burning.
Smoke
Light coloured (white or colourless) smoke indicates that suitable wood is used and that there is a good
combustion. Grey, blue or even black smoke is created in case of incomplete combustion, e.g. as a result of moist or
excess wood.
4.4 Fire with oven (if applicable)
If your fire is provided with an oven, you can use it to heat or cook dishes.
You can close the oven, using the valve (see Appendix 2, Fig. 6 (K)). You will usually suspend it at the side of the fire,
because air for glass pane aeration is supplied by the oven. Use the oven glove for this.
When used, you must always place aluminium foil in the oven in order to avoid fat from getting on the oven surface
and burning into it. Only use the oven after the fire's paint has hardened (see section 4.1).
4.5 Fire with fan(s)
Appliances that are made with fans will heat a room more quickly and increase comfort. As soon as the fan is
switched on you will be able to feel a pleasant warm air flow.
4.5.1 How the fan(s) work
The fans are operated by means of the switch on the appliance.
We distinguish three positions (see Appendix 2, Fig. 8):
Position I – ON (the fans are running, irrespective of the fire's temperature)
Position O – OFF (the fans are off)
Position II – AUTO (the fans will only run when the fire has reached the required temperature)
If the switch is in position II, the fans will be controlled by means of a temperature switch. The fans will become
operational automatically, as soon as the fire reaches the correct temperature. This depends on your installation
and your heating behaviour and may take an hour in some instances. After the appliance has cooled down, the fans
will switch off automatically.
The speed of the fans is controlled by means of a slider on the adapter. In position 1 the fans will run at the lowest
speed, in position 4 they will run at the highest speed.
4.6 Fire with central heating connection
In the installation/user manual, which is supplied separately with the fire, the operation of the fire with the central
heating connection is explained.
UK
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dik Geurts Lars 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dik Geurts Lars 900 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info