499302
28
Zoom out
Zoom in
Previous page
1/54
Next page
28
Installation Guide
GB
4.2 Multi Search
When you enter the “Multi Search” menu a
window like the one beside will open.
1. In the “Satellite” item press [Vol
] to
select the satellite which you want to scan
or press [OK] to open the “satellite list” to
select directly with [CH ] , and press
[OK] to mark/unmark and [MENU] to
nish the selection. You can select several
satellites in this menu. The system will
use DiSEqC1.0/1.1, DiSEqC1.2 and USALS
functions to search the marked satellites
and scan channels.
2. On “FTA Only” item, press [Vol ] to select scanning of all channels or just scanning
of free channels. If you select “Yes”, it will scan free channels only.
3. On “Scan Channel” item, press [Vol ] to select the scanning range from TV + radio
channels, only TV channels or only radio channels.
4. On “Scan Mode” item, you can select “Auto Scan”, “Preset Scan” or “NIT Search” to
blind scan preset transponders or network transponders of the selected satellite.
5. Select “Search” and press [OK] to start scanning. In the lower part of the window the
progress of scanning and the found channels are displayed.
6. Press [Menu/Exit] to cancel or fi nish the scanning and saving the found channels.
4.3 TP Scan
When you enter “TP Scan” menu a window
like the one beside will be displayed.
1. In the “Satellite” item press [Vol ] to
select the satellite which you want to scan
or press [OK] to open the “satellite list” to
select directly with [CH ] , press [OK]
to confi rm it.
2. TP Index: Use [Vol ] to select the
desired transponder or press [OK] to
open the TP list to select directly with
[CH ], press [OK] again to display
the TP number where the channel can be
found. Press [Red / Green / Yellow] key
on the RCU for the related functions.
4. INSTALLATION
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Digitalbox IMPERIAL DB 2 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Digitalbox IMPERIAL DB 2 USB in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Digitalbox IMPERIAL DB 2 USB

Digitalbox IMPERIAL DB 2 USB User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info