716642

Dickinson Marine Newport Manual

11
Zoom out
Zoom in
Previous page
1/41
Next page
www.dickinsonmarine.com ~ info@dickinsonmarine.com
Form#7.2-229 Issue#2
11
Deck Fitting
To install the thru deck fitting, a hole must be cut in your deck. Depending on
the diameter of the chimney stack will depend on the size hole that needs to be
cut. There should be a 1” clearance all around the chimney pipe. For example, a
3” diameter exhaust pipe would require a 5” hole drilled in the deck and a 4”
pipe would have a 6” hole. Once a hole is cut, you can line the raw hole with
epoxy, caulking or a metal liner to finish it off. Just ensure there is a 1” air gap
between the side of the hole and the chimney pipe.
The thru-deck fitting includes a stainless steel dress ring for the interior of
the cabin and a neoprene rubber gasket to better seal the fitting on the deck
side. Depending on the contour or the angle of the cabin top, you may need
to make a hardwood spacer block. One surface of the block would be a level
plane to mate to the deck cap. The other would match the angle or contour of
the cabin top. A hole through the center of the block would also be 2 inches
greater then the diameter of the flue pipe.
*The Lofoten model has a 4” diameter pipe so it would need a 6” hole.
Exhaust Cap
The Dickinson DP or H style exhaust caps are most recommended. The
exhaust cap will fit over the crimp on the deck fitting or flue pipe. The
location of the exhaust cap above deck must be clear of any immediate
obstruction that may cause unusual air movement or turbulence.
CAUTION: The Exhaust Cap gets hot when the stove is operating.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dickinson Marine Newport at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dickinson Marine Newport in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info