716643
9
Zoom out
Zoom in
Previous page
1/41
Next page
www.dickinsonmarine.com ~ info@dickinsonmarine.com
Form#7.2-229 Issue#2
9
Mounting
There are holes provided in the feet of the heater to allow appropriate
fasteners to secure it to the floor. The Newport model has the appropriate
brackets to secure the heater to the bulkhead. The drip tray will then fit
under the bottom of the heater.
*The Newport bulkhead heater must be secured with the rear mounting
brackets supplied.
* All other model heaters must be secured to the floor through the bolt holes
in the legs.
**REMEMEBER: remove all protective plastic on ALL parts of the heater.
Chimney Pipe
The location and configuration of the chimney stack is very important to the
operation of the heater. A long, straight chimney stack will ensure a strong
draft for correct operation. The diameter of the chimney must be what is
specified. We recommend that the length of your chimney is a straight 5-6ft
run with a minimum of 4ft long and a maximum of 10ft. Avoid using elbows
and if necessary, use 45 degree elbows and allow for as much straight pipe
as possible with a minimum of 12” (28 cm) from the top of the heater. There
is no connector to connect the chimney pipe to the heater. There is a flue
collar already attached to the top of the heater and the pipe can attach by
squeezing the pipe into an oval shape and fitting it over the flue collar.
Chimney Pipe Diameters
Newport, Alaska & Antarctic Heaters- 3” diameter chimney (7.5cm)
Lofoten- 4” diameter chimney (10cm)
Barometric Damper
We have 2 options for installing the barometric damper into your chimney.
You can either have the barometric attached to a 22” stainless pipe to be the
first piece of pipe of your chimney off the top of the heater or a 7” piece of
pipe that you can fit into your chimney 12” to 24” from the top of the heater.
Alaska, Newport & Antarctic model heaters
Part# 16-001: 3” x 22” stainless pipe with barometric
Part# 16-010: 3” x 7” stainless pipe with barometric
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dickinson Marine Alaska at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dickinson Marine Alaska in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info