739131

Dibea GT200 Manual

7
Zoom out
Zoom in
Previous page
1/10
Next page
9 10
Start cleaning
●
Press the START button on the vacuum
cleaner or the ON/OFF button on the
remote control to start cleaning.
●
Before starting cleaning, make sure the
vacuum is not in sleeping mode. If yes,
press the START or ON/OFF button to wake
it up.
●
The START button doesn’t have light in
sleeping mode. It turns yellow in standby
mode and turns green when working.
Product Operation
Stop cleaning
●
When the vacuum cleaner is working, press the START or ON/OFF button to stop it.
●
After stopping it, the START button will turn yellow. And it will turn to sleeping
mode if there is no operation in 30 seconds.
Sleeping
●
When in sleeping mode, press the START or ON/OFF button can wake it up.
●
When in standby mode, long pres s the START button to turn to sleeping mode.
●
When in standby mode, the vacuum will turn to sleeping mode if there is no
operation in 30 seconds.
Product Operation
●
Cleaning Modes
Cleaning paths
●
This robot vacuum has 2 main cleaning paths, and will switch automatically when
cleaning on different floor types.
●
When the robot works in Auto(random) mode, it will also do Edge Cleaning and
Zig-zag cleaning.
When it considers the cleaning task is completed, the robot will go back to the
charging base automatically for recharging.
NOTE：
When in Auto mode, if you press the direction button on the remote control,
the robot will exit the smart cleaning modes(Edge & Zig-zag cleaning) and back to
random cleaning.
Scheduling
●
In standby mode, press the PLAN button to set the scheduling time
Once scheduled, the vacuum will clean at a certain time 7 days a week.
Recharging
●
When the battery is low, press the button on the vacuum or the button on
the remote control to make it go for recharging.
●
When it is working and the battery is low, the vacuum will automatically go back to
the charging base for recharging.
Zig-zag cleaning path
Edge cleaning path
●
Scheduling setting
Please use the remote control to set the scheduling. Once successfully scheduled, the
vacuum will clean at a certain time every day.
Before setting the time, make sure the START button is green. If the vacuum is in
standby mode, press the START button to wake it up first.
Set the clock time
Press the CLOCK button, and the
left 00 of the 00:00 will flash.
After finishing the setting, press
the CLOCK button to save the
setting.
Press the to set the hour and
minute, press the to change
between the hour and minute.
… 7 …


Need help? Post your question in this forum.

Forumrules
1

Forum

dibea-gt200

Reset search

  • After charging few hour, the start button show green light, which means the battery is full. But there is no respond when press start button (or controller start) after remove the charger. Is it battery drain and shall replace new or other reason? Submitted on 2-8-2024 at 05:16

    Reply Report abuse

  • Why is the GT200 spinning in a single spot and stops? It's fully charged. But it's not working properly. Thank you Submitted on 29-8-2023 at 04:04

    Reply Report abuse

  • I recently changed the brushes on my robot ... But the left one is not spinning ..pls advise Submitted on 23-7-2023 at 04:30

    Reply Report abuse

    • I have the same problem a few months ago. Just bought a new motor and replace it. Later, I open up the faulty motor and oil it. It then works properly. So I have a spare motor now. Answered on 23-7-2023 at 10:08

      Vote up Report abuse

  • My robot have problem and when click on start button it turn to red light with bee bee sound Submitted on 14-5-2022 at 11:07

    Reply Report abuse

  • My robot not working when click on start button it have turn green light then red light Submitted on 14-5-2022 at 11:06

    Reply Report abuse

  • The robotic cleaner produces a dragging sound intermittently when in use. Pl advise. Thanks. Submitted on 2-7-2021 at 10:02

    Reply Report abuse

  • Every 2 second it changes direction hence remaining in a small zone. there is no problem with the wheels and i had cleaned the sensors hoping it will get alright Submitted on 30-1-2021 at 17:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dibea GT200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dibea GT200 in the language / languages: English as an attachment in your email.

The manual is 7,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info