585377

Dexford RCT 200 Manual

19
Zoom out
Zoom in
Previous page
1/21
Next page
19
Setting the time
The device can display the time in 12 or 24-hour format. When the 12-hour format is selected, "AM"
(morning) or "PM" (afternoon) appears beside the time display.
1. Press and hold the SET button (6) until the year display flashes. Use the button Ï (5) or Î (13) to set
the year. Press the Ï button to increase the year by one. Press the Î button to reduce the year by
one. Press the SET button to confirm the setting.
2. The MONTH (4) indicator then flashes. Use the Ï or Î button to set the month in the same way and
confirm the setting by pressing the SET button.
3. Proceed in exactly the same way for the other settings. Setting the time zone is described in Section
Setting the time zone. Therefore, press the SET button first to skip to the next point (Hour). The
sequence of time and date settings is as follows:
Note:
• The following language settings are available for the weekday: German, English, French, Danish, Dutch,
Italian and Spanish.
• If there is no input for a period of 30 seconds while making a setting, the LC display automatically
switches from Setting mode to Display mode. The entries made to that point are discarded.
• If you press and hold the Ï or Î button when in Setting mode, the corresponding menu options are run
through the display quickly.
• The device can be reset by pressing the RESET button (15). All the settings made are reset to their
default status. The device then scans for the DCF radio signal.
Setting the time zone
If you are not in Germany and want to adjust the clock to the time zone you are currently in or you simply
want to display the time from another country, you can use this function to set the time difference from the
DCF radio signal transmitted in Germany (German time).
1. Press and hold the SET button until the year flashes.
2. Press the SET button 5 times until the time zone setting flashes. "TZ" (Time Zone) appears in the LC
display.
3. Press the Î button once to set the difference, e.g. -1 (hour) for England, or the Ï button 7 times (+7
hours) for Hong Kong.
4. Press the WAVE button (14) to confirm the setting.
Setting the alarm time
You can set two alarm times on the device.
1. Press and hold the ALARM button (7) until the time flashes and "A1" appears in the LC display for
alarm time 1.
2. Use the buttons Ï (5) and Î (13) to set the hour and confirm it by pressing the ALARM button.
3. The display switches to the minute display.
4. Set the minute in the same way as the hour and confirm by pressing the ALARM button.
5. Use the Ï button to activate the alarm time and the alarm icon
(10) appears in the display for the
first alarm time. Press the Ï button again to deactivate the alarm time and the alarm icon
disappears from the display.
6. The time and "A2" for the second alarm time flash in the display. If so required, set a second alarm
time. Press the Ï button to activate the alarm time. The alarm icon
for the second alarm time
appears in the LC display. Proceed in the same way as for the first alarm time.
7. Otherwise, press the ALARM button as often as necessary until the current time reappears in the
display.
8. A beep tone is issued at the alarm time set which starts slowly then sounds at increasingly shorter
intervals. Press any button to deactivate the alarm signal or the SNOOZE/LIGHT button (8) to activate
the Snooze function (refer to Section Snooze function).
Year → Month → Day → Language → Weekday (abbreviated)
→ 12/24 Hr (12/24-hour format) → Time zone → Hour → Minute
… 19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dexford RCT 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dexford RCT 200 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info