585377

Dexford RCT 200 Manual

18
Zoom out
Zoom in
Previous page
1/21
Next page
18
Operating elements
1. TEMP display (temperature) 10. Alarm icon
2. Hour display 11. Minute display
3. DATE display 12. DAY display (weekday, abbreviated)
4. MONTH display 13. Î button
5. Ï button 14. WAVE button
6. SET button 15. RESET button
7. ALARM button 16. Battery compartment
8. SNOOZE/LIGHT button 17. Sensor opening
9. Second display 18. Base
Automatic time synchronisation
The transmitter for the DCF radio signal in Germany is near Frankfurt and also reaches other European
countries. Further information on the DCF radio signal is available in Internet.
• After inserting the battery, the device automatically scans for the DCF radio signal to complete
synchronisation of the time. The radio signal icon
flashes, thus indicating that scanning for the signal
has started. When the radio signal icon is displayed continually, the DCF radio signal has been received.
• To ensure that time deviations are kept as small as possible, a daily time synchronisation occurs at night
at 2:00 a.m. If this synchronisation is unsuccessful (the radio signal icon disappears from the LC
display), 4 further attempts are made at the top of the next hours. A time synchronisation once a day
normally suffices to keep the time accurate to the second.
• Press the WAVE button (14) to start the time synchronisation manually. Press the WAVE button again to
interrupt time synchronisation. If no signal is received within 7 minutes, signal scanning stops (the radio
signal icon
disappears) and restarts at the top of the next hour.
• Since there is less atmospheric disturbance at night, signal reception should be possible during the
night.
• Signal reception is weaker in buildings with cement walls, e.g. office buildings or basements. If no signal
is received in such cases, position the device in the vicinity of a window.
Inserting the battery
Open the battery compartment (16) on the rear side of the device and insert a 1.5 V battery, type AAA/LR03
(not supplied with the device). Pay attention to correct polarity (+ / -) as indicated in the battery compartment.
After inserting the battery, an acoustic signal is issued and the radio signal icon
appears in the LC display
above the Alarm icon (10) at the top right. Close the battery compartment. The device then automatically
attempts to receive the DCF radio signal in order to display the time. If no signal is received, set the time
manually.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dexford RCT 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dexford RCT 200 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info