Manual DeWalt DWV902L T 1 (page 36 of 156) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

549677

Zoom out

Zoom in

1/156

ENGLISH

NOTE: If there is any doubt on the condition

of the filters they MUST be replaced. DO NOT

continue use if filters are damaged.

WARNING: Never use compressed

air or a brush to clean filters, otherwise

damage to the filter membrane will

occur which will allow dust to pass

through the filter. If needed, gently tap

against a hard surface or rinse with

room temperature water and let air

dry. Cleaning of the filters is typically

unnecessary, even if the filter is

covered with dust. The automatic filter

cleaning system will maintain maximum

performance and continue to function.

If visual damage to the filter membrane

exists, replace filters. Filters typically

last between six and twelve months

depending on use and care.

To Install Filters

1. Ensure filter seal (aa) is in place and is secure

2. Line up filter threads (z) to vacuum head threads

and using moderate force, turn filter clockwise

until tight.

NOTE: Use care to not damage filter material.

3. Place the vacuum head (c) onto the container

and secure it by closing the canister latches (d).

Lubrication

Your appliance requires no additional lubrication.

Cleaning

WARNING: Never use solvents or other

harsh chemicals for cleaning the non-

metallic parts of the appliance. These

chemicals may weaken the materials

used in these parts. Never let any liquid

get inside the machine; never immerse

any part of the appliance into a liquid.

1. Vacuum the outside of the dust extractor. For

further cleaning use a cloth dampened only with

water and mild soap if necessary.

2. After use dispose of cloth in an appropriate

container.

Storage (ﬁ g. 11)

1. Empty the canister, refer to To Empty Canister

under Operation.

2. Clean the vacuum inside and outside. Refer to

Cleaning.

3. Clean or replace filters, refer to Filters.

4. Store the suction hose and the power cord as

shown in the illustration. Place the unit in a dry

room and secure it from unauthorized use.

NOTE: Plug inlet plug (s) into inlet (j) to keep

debris inside canister when suction hose is

removed. You can also attach the ends of the

hose together and lock together with the twist-

lock end.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have

not been tested with this product, use

of such accessories with this appliance

could be hazardous. To reduce the risk

of injury, only DEWALT recommended

accessories should be used with this

product.

ACCESSORIES

DWV9340-XJ Filter

DWV9315-XJ Crush-proof hose

DWV9316-XJ Anti-static hose

DWV9401-XJ Paper bag

DWV9400-XJ Plastic liner

DWV9402-XJ Fleece bag

DWV9500-XJ Vac Rack

DEWALT AirLock System

DWV9000 Twist-Lock

connection

DWV9110 29-35mm tapered

rubber adapter

DWV9120 35-38mm stepped

rubber adapter

DWV9130 35mm OD adapter

DWV9150 35mm OD angle

adapter

VAC RACK DWV9500 INSTALLATION (FIG. 11, 12)

NOTE: The DWV902MT comes with DWV9500 vac

rack attachment already installed,

1. Remove the 4 carry handle screws using a T-25

star bit and remove the carry handle.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DWV902L T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DWV902L T 1

DeWalt DWV902L T 1 Additional guide - Polish - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DWV902L T 1 Manual

Product: