Manual DeWalt DWE46101 T 1 (page 42 of 192) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

548624

Zoom out

Zoom in

1/192

ENGLISH

2. Turn cornering door locking lever (l)

counterclockwise one full rotation. Grasp the

corner door (m) and rotate open.

3. Place hands away from the wheel area and

position yourself so the open underside of the

shroud is facing away from you.

4. Turn the tool on and allow the tool to reach

full speed before touching the tool to the work

surface.

5. Place the wheel onto the work surface and

move the grinder from right to left to cut around

the inside corner for best dust collection.

6. Remove the tool from work surface before

turning tool off. Allow the tool to stop rotating

before laying it down.

7. Close the corner door and lock in place using

the cornering door locking lever (l).

DUST EXTRACTION (FIG.7)

WARNING: Use only power tools

recommended by DEWALT with this

attachment.

For more information about DEWALT power tools

compatible with this attachment, please contact one

of our authorisec services centers, listed on the back

cover, or refer to the full details of our after-sales

service available on the Internet at:

www.2helpU.com.

WARNING: This attachment MUST

BE used with a dust extractor system.

ALWAYS wear certified safety face or

dust mask.

NOTE: Ensure hose connection is secure.

NOTE: The amount of dust retained by the dust

extractor vacuum is dependent on its filter system.

Refer to the dust extractor vacuum instruction

manual for more information.

All DEWALT dust collection shrouds are designed to

work with the DEWALT Airlock DWV9000 connector.

1. Attach the DWV9000 connector (s) to your dust

collector hose (t).

2. Unlock the DWV9000 connector (s) and slide

onto dust port (h).

3. Lock the DWV9000 connector (s) to secure.

TRADITIONAL DUST EXTRACTOR VACUUM HOSES (FIG.7)

Attach recommended dust extractor vacuum hose

to dust port (h).

Prior to Operation

• Install the guard and appropriate disc or wheel.

Do not use excessively worn discs or wheels.

• Be sure the inner and outer flanges are

mounted correctly.

• Make sure the disc or wheel rotates in the

direction of the arrows on the accessory and

the tool.

OPERATION

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories. Before

reconnecting the tool, depress and

release the switch to ensure that the

tool is off.

WARNING:

• Ensure all materials to be ground or

cut are secured in place.

• Apply only a gentle pressure to the

tool. Do not exert side pressure on the

disc.

• Avoid overloading. Should the tool

become hot, let it run a few minutes

under no-load condition.

Proper Hand Position (ﬁ g.8)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the side

handle (c), with the other hand on the body of the

tool, as shown in figure 8.

Slider Switch (ﬁ g.1)

WARNING: Before using the tool,

check that the side handle is tightened

securely.

CAUTION: Before connecting the tool

to a power supply, be sure the switch is

in the off position by pressing the rear

part of the switch and releasing. Ensure

the switch is in the off position as

described above after any interruption

in power supply to the tool, such

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DWE46101 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DWE46101 T 1 Manual

Product: