548624

DeWalt DWE46101 T 1 Manual

40
Zoom out
Zoom in
Previous page
1/192
Next page
ENGLISH
38
use of the mortar raking shroud could otherwise
contaminate the working environment or pose an
increased health risk to the operator and those in
close proximity.
DO NOT use under wet conditions or in the
presence of flammable liquids or gases.
This heavy-duty slot cutter is a professional power
tool.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.
FEATURES
Dust Ejection System
The dust ejection system (f) prevents dust pile-up
around the guard and motor inlet, and minimises the
amount of dust entering the motor housing.
No-Volt Release Switch
The ON/OFF switch has a no-volt release function.
In the event of a power outage or other unexpected
shut down, the switch will need to be cycled (turned
on and off) to restart tool.
E-Clutch
This unit is equipped with an E-Clutch (Electronic
Clutch), which in the event of a high-load or wheel
pinch, the unit will be shut off to reduce the reaction
torque to the user. The switch needs to be cycled
(turned on and off) to restart tool.
Power-OFF Overload Protection
The power supply to the motor will be reduced
in case of motor overload. With continued motor
overload, the tool will shut off. The switch needs to
be cycled (turned on and off) to restart tool. The tool
will power off each time the current load reaches
the overload current value (motor burn-up point).
If continued overload shutdowns occur, apply less
force/weight on the tool until the tool will function
without the overload engaging.
Complete Electronic Control
The internal electronic speed control offers
consistent wheel speed while using the tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your DEWALT tool is double insulated in
accordance with EN 60745; therefore no
earth wire is required.
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
DEWALT service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved
3–core extension cable suitable for the power input
of this tool (see Technical Data).The minimum
conductor size is 1,5 mm
2
; the maximum length
is 30 m.
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories. Before
reconnecting the tool, depress and
release the switch to ensure that the
tool is off.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DWE46101 T 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DWE46101 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info