Manual DeWalt DWE396 (page 30 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546640

Zoom out

Zoom in

1/132

ENGLISH

5. Close the gearcase cap (l) and tighten the

gearcase cap screw.

WARNING: Before operation let the

saw blades run freely for approx. 20 s.

Saw Blades

Cat. No. Material

to be cut

Recommended

saw blade type

DWE396 Rough wood HSS DT2970

Fine wood HSS DT2971

Fine wood TCT DT2972

Low density building block TCT T12 DT2973

Medium density building block TCT T20 DT2977

DWE397 Rough wood HSS DT2978

Low density building block TCT T12 DT2974

Medium density building block TCT T20 DT2976

Insulation materials HSS DT2979

Celluar contrete TCT 12 DT2975

DWE398 Rough wood HSS DT2978

Low density building block TCT T12 DT2974

Medium density building block TCT T20 DT2976

Insulation materials HSS DT2979

Celluar contrete TCT 12 DT2975

DWE399 Rough wood HSS DT2978

Low density building block TCT T12 DT2974

Medium density building block TCT T20 DT2976

Insulation materials HSS DT2979

Celluar contrete TCT 12 DT2975

Prior to Operation (ﬁ g. 1)

• Mount the appropriate type of saw blade.

• Check that the tool is running properly and can

perform all its functions. Make sure that the bar

(f) is still straight and the saw blades (e) and the

housing are undamaged.

OPERATION

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories.

WARNING:

• Ensure the material to be sawn is

secured in place.

• Apply only a gentle pressure to the

tool and do not exert side pressure on

the saw blade.

• Avoid overloading.

WARNING: For applications where

mineral dust or hardwood is emitted due

to the work process the machine shall be

connected to a suitable dust extraction

system.

Proper Hand Position (ﬁ g. 1, 6)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the

front handle (d) with the other hand on the rear grip

handle (c).

Switching On and Off (ﬁ g. 1)

For safety reasons the ON/OFF switch (a) is

equipped with a lock-off button (b).

1. Push the lock-off button (b) to unlock the tool.

2. To run the tool, press the ON/OFF switch (a).

As soon as the ON/OFF switch is released the

lock-off switch is automatically activated to

prevent unintended starting.

3. Always switch off the tool before unplugging.

Sawing (ﬁ g. 1, 3, 4, 6)

NOTICE: Do not use the saw for cutting

curves or pockets. Make sure the bar

end protrudes from the workpiece.

For long, straight cuts first draw a line on the

workpiece and follow the line.

Make downward cuts only. Avoid cutting earth as

this will blunt the saw blades very quickly.

When using a saw horse always cut on the outside

of the saw horse arms.

1. Clamp the workpiece on one side only to

prevent the bar from jamming in the workpiece.

Should this happen, ease open the cut with

wedges to relieve the strain on the blade. Do

not try to wrench the saw free.

2. Hold your D

EWALT power tool by the front

handle (d) and the rear grip handle (c) to guide

the saw properly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DWE396 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DWE396 Manual

Product: