546917

DeWalt DW753 Manual

29
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH
27
16. Remove adjusting keys and wrenches.
Form the habit of checking to see that adjusting
keys and wrenches are removed from the tool
before operating the tool.
17. Avoid unintentional starting.
Do not carry the tool with a finger on the switch.
Be sure that the tool is in the “off” position
before plugging in.
18. Use outdoor extension leads.
Before use, inspect the extension cable and
replace if damaged. When the tool is used
outdoors, use only extension cords intended for
outdoor use and marked accordingly.
19. Stay alert.
Watch what you are doing. Use common
sense. Do not operate the tool when you are
tired or under the influence of drugs or alcohol.
20. Check for damaged parts.
Before use, carefully check the tool and mains
cable to determine that it will operate properly
and perform its intended function. Check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting and any
other conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorized
service centre unless otherwise indicated in
this instruction manual. Have any damaged or
defective switches replaced by an authorised
service center. Do not use the tool if the switch
does not turn it on and off. Never attempt any
repairs yourself.
WARNING! The use of any accessory
or attachment or performance of any
operation with this tool other than those
recommended in this instruction manual
may present a risk of personal injury.
21. Have your tool repaired by a qualified
person.
This electric tool complies relevant safety rules.
Repairs should only be carried out by qualified
persons using original spare parts; otherwise
this may result in considerable danger to the
user.
Additional Safety Rules for Grinding
and Honing Machines
• Use only grinding and honing wheels carrying
a label stating the manufacturer, the type of
bonding material, the dimensions and the
maximum speed of the wheel, and complying
with EN 12413.
• Do not use grinding and honing wheels with a
maximum speed lower than the speed of the
machine (see technical data).
• Do not use grinding and honing wheels that do
not conform to the dimensions stated in the
technical data. Do not use any spacers to make
a wheel fit onto the spindle.
• Replace a grinding or honing wheel as soon as
it has worn by more than ca. 40 mm.
• Always strictly follow the instructions when
replacing a grinding or honing wheel.
• Before fitting a new grinding or honing wheel, it
must be checked for cracks by suspending it on
a thin cord and striking it gently with a hammer.
The wheel should produce a clear sound. If not,
the wheel is damaged and must not be used.
• Regularly check a grinding or honing wheel for
alignment. If the wheel is running out of centre
or out of balance, it must be replaced.
• Always store grinding and honing wheels in a
dry place.
• Only use the machine at ambient temperatures
from 5 °C to 40 °C.
• Switch on the machine and let the wheel run
with no load for at least 30 seconds before use.
• Always wear safety goggles when grinding dry.
• Never grind magnesium tools.
WARNING: Use of this machine can
generate dust containing chemicals
known to cause cancer, birth defects
or other reproductive harm. Use
appropriate respiratory protection.
WARNING: Do not use the machine
in the vicinity of any highly inflammable
materials.
Residual Risks
The following risks are inherent to the use of these
machines:
– injuries caused by touching the rotating parts,
– injuries caused by disruption of the grinding
wheel.
These risks are most evident:
– within the range of operation,
– within the range of the rotating machine parts.
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW753 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW753 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DW753

DeWalt DW753 User Manual - Polish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info