Manual DeWalt DW745 T 4 (page 35 of 188) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546618

Zoom out

Zoom in

1/188

ENGLISH

3. Guard against electric shock.

Avoid body contact with earthed surfaces(e.g.,

pipes, radiators, cookers and refrigerators).

When using the tool under extreme

conditions(e.g., high humidity, when metal

swarf is being produced, etc.), electric safety

can be improved by inserting an isolating

transformer or a(FI) earth-leakage circuit-

breaker.

4. Keep other persons away.

Do not let persons, especially children, not

involved in the work, touch the tool or the

extension cord and keep them away from the

work area.

5. Store idle tools.

When not in use, tools must be stored in a dry

place and locked up securely, out of reach of

children.

6. Do not force the tool.

It will do the job better and safer at the rate to

which it was intended.

7. Use the right tool.

Do not force small tools to do the job of a heavy

duty tool. Do not use tools for purposes not

intended; for example do not use circular saws

to cut tree limbs or logs.

8. Dress properly.

Do not wear loose clothing or jewellery, as

these can be caught in moving parts. Non-

skid footwear is recommended when working

outdoors. Wear protective hair covering to

contain long hair.

9. Use protective equipment.

Always use safety glasses. Use a face or

dust mask if working operations create dust

or flying particles. If these particles might be

considerably hot, also wear a heat-resistant

apron. Wear ear protection at all times. Wear a

safety helmet at all times.

10. Connect dust extraction equipment.

If devices are provided for the connection

of dust extraction and collecting equipment,

ensure these are connected and properly used.

11. Do not abuse the cord.

Never yank the cord to disconnect it from

the socket. Keep the cord away from heat,

oil and sharp edges. Never carry the tool by its

cord.

EC-Declaration of Conformity

MACHINERY DIRECTIVE

DW745

DEWALT declares that these products described

under Technical Data are in compliance with:

2006/42/EC, EN 61029-1, EN 61029-2-1.

These products also comply with Directive

2004/108/EC and 2011/65/EU. For more

information, please contact DEWALT at the following

address or refer to the back of the manual.

The undersigned is responsible for compilation of the

technical file and makes this declaration on behalf of

DEWALT.

Horst Grossmann

Vice President Engineering and Product

Development

DEWALT, Richard-Klinger-Straße 11,

D-65510, Idstein, Germany

01.11.2013

Safety Instructions

WARNING! When using electric tools,

basic safety precautions should always

be followed to reduce the risk of fire,

electric shock and personal injury

including the following.

Read all these instructions before attempting to

operate this product and save these instructions.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

General Safety Rules

1. Keep work area clear.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Do not expose the tool to rain. Do not use the

tool in damp or wet conditions. Keep the work

area well lit(250 - 300 Lux). Do not use the tool

where there is a risk of causing fire or explosion,

e.g., in the presence of flammable liquids and

gases.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW745 T 4 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW745 T 4 Manual

Product: