Manual DeWalt DW739 T 2 (page 20 of 76) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546446

Zoom out

Zoom in

1/76

ENGLISH

en - 3 13

2 Knobs

2 Fence clamp pieces

1 Allen key 2.5 mm

1 Allen key 6 mm

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

Description

Your bandsaw DW738/DW739 has been designed for professional

workshop applications: it performs straight, circular, mitre and bevel cuts.

It can cut a wide range of materials such as wood, plastics, non-ferrous

metals and leather.

Fig. A

1 ON/OFF-switch

2 Safety key

3 Blade guard

4 Table insert

5 Hinged cover

6 Blade tension adjuster

7 Blade centring adjuster

8 Cover retention knobs

9 Table tilt locking lever

10 Fence

11 Blade guard height adjuster

12 Upper blade guard/guide assembly

13 Motor location bolt

14 Blade speed adjuster (DW739)

15 Table

16 Mounting holes

Fig. B

17 Rear blade support bearing

18 Locking grub screw for (17)

19 Blade guide blocks 45°

20 Locking grub screw for (19)

21 Blade guide blocks 90°

22 Locking grub screw for (21)

Optional accessories

Fig. C1

23 Legstand

Fig. C2

24 Mitre fence

25 Cut length gauge

Electrical safety

The electric motor has been designed for one voltage only. Always check

that the power supply corresponds to the voltage on the rating plate.

Mains plug replacement (U.K. & Ireland only)

• Should your mains plug need replacing and you are competent to do

this, proceed as instructed below. If you are in doubt, contact an

authorized DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug with bared copper

conductors is dangerous if engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs fitted with the correctly

rated fuse (1).

• The cable wire colours, or a letter, will be marked at the connection

points of most good quality plugs. Attach the wires to their respective

points in the plug (see below). Brown is for Live (L) (2) and Blue is for

Neutral (N) (4).

• Before replacing the top cover of the mains plug ensure that the cable

restraint (3) is holding the outer sheath of the cable firmly and that the

two leads are correctly fixed at the terminal screws.

Never use a light socket.

Never connect the live (L) or neutral (N) wires to the earth pin

marked E or .

For 115 V units with a power rating exceeding 1500 W, we recommend to

fit a plug to BS4343 standard.

Using an extension cable

If an extension cable is required, use an approved extension cable suitable

for the power input of this machine (see technical data). The minimum

conductor size is 1.5 mm

When using a cable reel, always unwind the cable completely.

Also refer to the table below.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

230 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Assembly and adjustment

Prior to assembly and adjustment always unplug the tool.

• The machine is fully assembled except for the table and rip fence.

Mounting the table (fig. A, D1 - D6)

• Turn the table tilt locking lever (9 in fig. A) counterclockwise

approximately half a turn to release the tilt segments (27 in fig. D2).

• Swing back the connecting plate (26) which covers the blade slot in the

table (fig. D1).

• Place the table onto the segments (27) with the blade slot pointing to

the front of the machine (fig. D2).

• Carefully guide the table along the saw blade and align the holes in the

table with those in the segments.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW739 T 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW739 T 2 Manual

Product: