Manual DeWalt DW716E (page 31 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546159

Zoom out

Zoom in

1/132

• Connect the saw to a dust collection device when sawing wood.

Always consider factors which influence exposure of dust such as:

-– type of material to be machined (chip board produces more dust

than wood);

-– sharpness of the saw blade;

-– correct adjustment of the saw blade.

Ensure that the local extraction as well as hoods, baffles and chutes are

properly adjusted.

• Please be aware of the following factors influencing exposure

to noise:

-– use saw blades designed to reduce the emitted noise;

-– use only well sharpened saw blades;

• Machine maintenance shall be conducted periodically;

• Machine faults, including guards or saw blade, shall be reported as

soon as they are discovered;

• Provide adequate general or localized lighting;

• Ensure the operator is adequately trained in the use, adjustment and

operation of the machine;

• When fitted with laser, DO NOT change to a different type of laser.

Repairs shall only be carried out by the laser manufacturer or an

authorized agent.

Residual Risks

The following risks are inherent to the use of saws:

– injuries caused by touching the rotating parts

In spite of the application of the relevant safety regulations and the

implementation of safety devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of accidents caused by the uncovered parts of the rotating saw

blade.

– Risk of injury when changing the blade.

– Risk of squeezing fingers when opening the guards.

– Health hazards caused by breathing dust developed when sawing

wood, especially oak, beech and MDF.

Package Contents

The package contains:

1 Assembled mitre saw

1 Blade spanner

1 Saw blade

1 Dustbag

1 LED Worklight System (DW716EXPS)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

Description (ﬁ g. A1–A8)

WARNING: Never modify the power tool or any part of it.

Damage or personal injury could result.

1 On/off switch

2 Moveable lower blade guard

3 Fence left-hand side

4 Mitre lever

5 Mitre latch

6 Mitre scale

7 Fence right-hand side

8 Kerf plate

9 Carrying handle

10 Operating handle

11 Head lock up release lever

12 Electronic speed control dial (DW716E)

13 Spindle lock

14 Bevel clamp handle

15 Bevel scale

16 Dust spout

17 Fixed upper blade guard

18 Head lock down pin

19 Vertical position adjustment stop

20 Right-hand bevel lock override pin

21 Blade spanner

22 Hand indentation

23 Bench mounting holes

24 Dustbag

Optional Accessories

25 Work support extension

26 Adjustable length stop

27 Work piece clamp

28 Laser

62 LED Worklight System

INTENDED USE

Your DW716/DW716E/DW716EXPS mitre saw has been designed for

professional cutting of wood, wood products, aluminium and plastics. It will

perform the sawing operations of cross-cutting, bevelling and mitring easily,

accurately and safely.

The DW716/DW716E/DW716EXPS mitre saw is a professional power tool.

DO NOT let children come into contact with the tool. Supervision is required

when inexperienced operators use this tool.

Electrical Safety

The electric motor has been designed for one voltage only. Always check

that the power supply corresponds to the voltage on the rating plate.

Your tool is double insulated in accordance with EN 61029;

therefore no earth wire is required.

WARNING: 115 V units have to be operated via a fail-safe

isolating transformer with an earth screen between the primary

and secondary winding.

If the supply cord is damaged, it must be replaced by a specially prepared

cord available through the DEWALT service organization.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW716E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW716E Manual

Product: