Manual DeWalt DW625E T 4 (page 23 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

546412

Zoom out

Zoom in

1/100

ENGLISH

en - 4

Assembly and adjustment

Prior to assembly and adjustment always

unplug the tool.

Inserting and removing a cutter (fig. B)

• Press and hold down the spindle lock (4).

• Using the 22 mm wrench, loosen the collet nut (3)

a few turns and insert a cutter (24).

• Tighten the collet nut and release the spindle

lock (4).

Never tighten the collet nut without

a cutter in the collet.

Replacing the collet (fig. C)

Your DEWALT Router is supplied with a 1/2" collet

fitted to the tool. Other precision collets are also

available to suit the cutter used.

• Separate the collet (25) from the collet nut (3) by

pulling it firmly.

• Click the new collet in place.

Setting the electronic speed control dial (fig. A)

The speed is infinitely variable from 8,000 to

20,000 min

-1

using the electronic speed control

dial (2) for uniform cutting results in all types

of wood and plastics.

• Turn the electronic speed control dial to the

required level. The correct setting, however,

is a matter of experience.

1 = 8,000 min

-1

2 = 12,000 min

-1

3 = 16,000 min

-1

4 = 18,000 min

-1

5 = 20,000 min

-1

Adjusting the depth of cut (fig. A)

Your DEWALT Router is equipped with a high precision

depth adjustment system including a revolver depth

stop (20), a measuring lens (12) and fine adjuster (17).

Quick adjustment (fig. A & D)

• Loosen the plunge lock (14) by pulling it up.

• Lower the router carriage until the cutter is in

contact with the workpiece.

• Tighten the plunge lock (14) by pushing it down.

Never use a light socket.

Never connect the live (L) or neutral (N)

wires to the earth pin marked E or .

For 115 V units with a power rating exceeding 1500 W,

we recommend to fit a plug to BS4343 standard.

Using an extension cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor size

is 1.5 mm

. When using a cable reel, always unwind

the cable completely. Also refer to the table below.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

115 0-2.0 66 66 610

2.1 - 3.4 6 6 6 6 15 15

3.5 - 5.0 6 6 10 15 20 20

5.1 - 7.0 10 10 15 20 20 25

7.1 - 12.0 15 15 20 25 25 -

12.1 - 20.0 20 20 25 - - -

230 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW625E T 4 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 0,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW625E T 4 Manual

Product: