Manual DeWalt DW625 T 6 (page 31 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

546414

Zoom out

Zoom in

1/132

ENGLISH

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor

size is 1 mm

; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

Inserting and Removing a Cutter

(ﬁ g. 2)

1. Press and hold down the spindle lock (d).

2. Using the 22 mm wrench, loosen the collet nut

3. Tighten the collet nut and release the spindle

lock.

WARNING: Never tighten the collet

nut without a cutter in the collet.

Replacing the Collet. (ﬁ g. 3)

Your router is supplied with a 1/2" collet fitted to the

tool. Other precision collets are also available to suit

the cutter used.

1. Separate the collet (y) from the collet nut (c) by

pulling it firmly.

2. Click the new collet in place.

Setting the Electronic Speed Control

Dial (ﬁ g. 1A)

DW625E

The speed is infinitely variable from 8,000 to 20,000

min

-1

using the electronic speed control dial (b) for

uniform cutting results in all types of wood and

plastics.

Turn the electronic speed control dial to the required

level. The correct setting, however, is a matter of

experience.

1 = 8,000 min

-1

2 = 12,000 min

-1

3 = 16,000 min

-1

4 = 18,000 min

-1

5 = 20,000 min

-1

Adusting the Depth of Cut (ﬁ g. 1A)

Your router is equipped with a high precision depth

adjustment system including a revolver depth stop

(t), a measuring lens (l) and fine adjuster (q).

Quick Adjustment (ﬁ g. 1A, 4)

1. Loosen the plunge lock (n) by pulling it up.

2. Lower the router carriage until the cutter is in

contact with the workpiece.

3. Tighten the plunge lock (n) by pushing it down.

4. For optimum ease of operation, the carriage

return can be adapted to the required depth of

cut by rotating or sliding the knurled nut (i).

5. Loosen the clamping screw.

6. Rotate the handwheel (k) until the fine adjuster

(q) touches the revolver depth stop (t).

7. Set the measuring lens to a round figure

(e.g. 0).

8. Adjust the depth of cut using the handwheel

(k) and the measuring lens (l). The distance

between the top of the revolver depth stop and

the bottom of the fine adjuster is the adjusted

depth of cut.

9. Tighten the clamping screw (o).

Triple Depth Adjustment Using the

Revolver Depth Stop (ﬁ g. 5)

The revolver depth stop (t) can be used to set three

different depths. This is particularly useful for deep

cuts, performed in steps.

1. Place a depth template between the fine

adjuster (q) and the revolver depth stop (t) to

adjust the exact cutting depth.

2. If required, set all three screws.

WARNING: Make shallow cuts only!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW625 T 6 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 8,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW625 T 6 Manual

Product: