Manual DeWalt DW543 T 3 (page 25 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544673

Zoom out

Zoom in

1/80

ENGLISH

en - 5

• To remove a chisel pull back the tool holder

locking sleeve (6) and pull the chisel out of the

tool holder.

Assembling and fitting the side handle (fig. E)

The side handle (8) can be mounted on either side of

the tool to suit both RH- and LH-users.

Always operate the Demolition Hammer

with the side handle properly assembled.

• Unscrew the side handle clamp knob (9) and

disassemble the side handle (8).

• Snap the steel ring (15) over the collar behind the

tool holder. Squeeze both ends together, mount

the bush (16) and insert the pin (17).

• Fit the side handle (8) and screw on the clamp

knob (9). Do not tighten.

• Rotate the side handle to the desired working

position.

• Lock the side handle mounting assembly in place

by tightening the clamp knob (9).

Instructions for use

• Always observe the safety instructions

and applicable regulations.

• Be aware of the location of pipework and

wiring.

• Apply approx. 20 kg pressure to the tool.

Excessive force does not speed up

chiselling but decreases tool performance

and may shorten tool life.

Chipping and chiselling (fig. A)

• Set the electronic impact power control dial (2).

• Fit and adjust the side handle (8).

• Set the mode indicator lever (5) to the upright or

rear position.

• Insert the appropriate accessory.

• Rotate the chisel or point by hand to lock it into

one of 8 positions.

• Rotate the mode indicator lever (5) back to the

forward position indicated by the impacting

symbol .

• Press the ON/OFF-switch (1).

• For continuous operation, depress the lock-on

button (10) on the ON/OFF-switch.

• To stop the tool, simply press the ON/OFF-switch

(1) once more. Always switch OFF the tool when

work is finished and before unplugging.

Various types of SDS-max

chisels are available as an

option.

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your DEWALT Power Tool has been designed to

operate over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

The Demolition Hammer is not user-serviceable. Take

the tool to an authorized DEWALT repair agent as

soon as the service indicator LED (4) lights up.

Lubrication

Your Power Tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean the

housing with a soft cloth.

Accessory maintenance

Accessory maintenance at the right time guarantees

optimal results in application and a long and efficient

accessory life.

• Grind the chisels on grinding disks. Refer to fig. F

for the appropriate angles of the following chisels:

- spade-shaped chisel (18)

- cold chisel (19)

- pointed chisel (20)

- U-shaped chisel (21)

- hollow chisel (22)

- mortar chisel (23)

- toothed chisel (24)

• These chisels can be reground only a

limited number of times. If in doubt,

contact your dealer for recommendations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW543 T 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW543 T 3 Manual

Product: