544673
23
Zoom out
Zoom in
Previous page
1/80
Next page
15
ENGLISH
en - 3
breakage of parts and any other conditions that
may affect its operation. Have damaged guards
or other defective parts repaired or replaced as
instructed.
Do not use the tool if the switch is defective.
Have the switch replaced by an authorized
DEWALT repair agent.
20 Have your tool repaired by an authorized
DEWALT repair agent
This Power Tool is in accordance with the
relevant safety regulations. To avoid danger,
electric appliances must only be repaired by
qualified technicians.
Package contents
The package contains:
1 Medium Duty Demolition Hammer
1 Side handle
1 Tube of chisel lubricant
1 Chisel bit
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or
accessories which may have occurred during
transport.
Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your DEWALT Medium Duty Demolition Hammer has
been designed for professional chipping, chiselling
and demolition applications.
1 ON/OFF-switch with lock-on button (10)
2 Electronic impact power control dial
3 Power-ON indicator LED
4 Service indicator LED
5 Mode indicator lever
6 Tool holder for SDS-max
®
accessories
7 Collar
8 Side handle
9 Side handle clamp knob
10 Lock-on button
11 Switch handle cover
12 Lower service access cover
13 Upper service access cover
14 Gearbox access cover
Soft start feature
The soft start feature allows the speed to build up
more slowly, thus preventing the chisel or point from
“bouncing” around on the masonry when starting up.
Electronic impact control (fig. B)
The electronic impact control (2) offers the following
advantages:
- use of smaller accessories without risk of breakage
- chiselling light and brittle materials without
shattering
- optimal tool control for precise chiselling
Service and power-ON indicator LEDs (fig. B)
The red service indicator LED (4) lights up when the
carbon brushes are nearly worn out to indicate that
the tool needs servicing. After approx. 8 hours of
use the motor will automatically be shut off. The
carbon brushes are not user-serviceable. Take the
tool to an authorized DEWALT repair agent.
The green power-ON indicator LED (3) lights up
when the tool is switched ON. If the indicator LED is
lit but the tool does not start, the electrical motor
may be defective. If the indicator LED does not light
up and the tool does not start, the ON/OFF-switch
or the mains cord may be defective.
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your DEWALT tool is double insulated in
accordance with EN 50144; therefore no
earth wire is required.
Mains plug replacement (U.K. & Ireland
only)
Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
DEWALT repair agent or a qualified electrician.
Disconnect the plug from the supply.
Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW543 T 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW543 T 3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info