382575
26
Zoom out
Zoom in
Previous page
1/116
Next page
ENGLISH
24
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of
injury, turn unit off and disconnect
machine from power source before
installing and removing accessories,
before adjusting or changing set-
ups or when making repairs. Be sure
the trigger switch is in the OFF position.
An accidental start-up can cause injury.
Mounting the Saw Blade (fi g. 2)
1. Open the blade clamp collar (g) to release the
blade clamping mechanism.
2. Insert the saw blade (h) into the holder (d) until
it engages. The blade can be installed with the
teeth pointing down or up.
3. Close the blade clamp collar (g) to lock the
blade clamping mechanism.
To remove the saw blade, proceed in reverse order.
Saw Blades
material recommended saw blade
ferrous metal fine-toothed
non ferrous metal coarse-toothed
wood coarse-toothed
plastic fine-toothed
masonry carbide-tipped
A wide variety of dedicated saw blades is available
as an option.
WARNING: Always select your saw
blade with great care.
Setting the Adjustable Saw Shoe
(fi g. 3)
The saw shoe can be adjusted to limit the depth of
cut and prolong the life of your saw blade.
1. Push the release lever (f) down.
2. Slide the saw shoe (e) into the desired position.
3. Push the lever up to secure the shoe in place.
SETTING THE PENDULUM STROKE (FIG. 4)
DW311
The adjustable pendulum stroke guarantees a
perfect cutting stroke for different materials. The tool
can be used in the following operating modes:
Straight reciprocating motion: for cutting
metal and tubes and for finishing wood.
Orbital motion: for fast cutting of wood.
Turn the selector (c) into the required position
aligning the mark (i) with the arrow (j).
Prior to Operation
Mount the appropriate type of saw blade. Use
narrow saw blades for cutting curves. Use flexible
bimetal saw blades for hard-to-reach positions (e.g.
close to walls, etc.).
OPERATION
Instructions for Use
WARNING: Always observe the safety
instructions and applicable regulations.
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories.
WARNING:
Ensure the material to be sawn is
secured in place.
Apply only a gentle pressure to the
tool and do not exert side pressure
on the saw blade. If possible, work
with the saw shoe pressed against
the workpiece. This prevents damage
to the blade and stops the tool from
jerking and vibrating.
When sawing in walls or floors be
aware of the location of pipework and
wiring. Always hold the tool by its
handle.
• Avoid overloading.
Let the blade run freely for a few
seconds before starting the cut. Never
switch on the tool when the saw
blade is jammed in the workpiece or in
contact with the material.
Proper Hand Position (fi g. 1, 6)
WARNING: To reduce the risk of
serious personal injury, ALWAYS use
proper hand position as shown.
WARNING: To reduce the risk of
serious personal injury, ALWAYS hold
securely in anticipation of a sudden
reaction.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt dw310k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt dw310k in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info