Manual DeWalt DW 685 (page 28 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

78380

Zoom out

Zoom in

1/120

ENGLISH

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745; therefore no

earth wire is required.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

EWALT service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved

3–core extension cable suitable for the power

input of this tool (see technical data). The minimum

conductor size is 1.5 mm

; the maximum length is

30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

Replacing the Blade (ﬁ g. 1a, 1b)

1. Remove the knurled nuts (d) and the cover

plate (c).

2. Hold the spindle using the sickle spanner and

remove the front flange by turning it clockwise.

3. Change the blade.

4. Tighten the flange securely by turning it

counterclockwise while holding the spindle with

the sickle spanner.

5. Mount the cover plate and tighten the

knurled nuts.

Adjusting the Depth of Cut (ﬁ g. 2)

The correct depth of cut for biscuit jointing is

determined by the size of the biscuit dowel:

Biscuit dowel size Depth of cut

0 8 mm

10 10 mm

20 12 mm

To set the correct depth of cut, turn the adjuster (b)

as required. The depth of cut can be read from the

scale.

Adjusting the Blade to the Panel

Thickness (ﬁ g. 3)

The fine adjuster (e) allows centring the grooving

blade in the panel edge.

1. Slacken the locking knob (n).

2. Adjust the fine adjuster (e) as required. The

setting can be read from the scale (m).

3. Tighten the locking knob.

Mounting and Adjusting the Parallel

Fence (ﬁ g. 1a)

1. Slacken the locking bolts (l).

2. Insert the rods of the parallel fence into the

corresponding holes in the base of the tool.

3. Set the parallel fence to the desired position.

4. Tighten the locking bolts.

Mounting the Mitre Fence (ﬁ g. 1a)

1. Slacken the locking bolts (l).

2. Fully insert the rods of the mitre fence into the

corresponding holes in the base of the tool.

3. Tighten the locking bolts.

Mounting the Cutting Insert

(ﬁ g. 1b, 4)

1. Remove the knurled nuts (d) and the cover

plate (c).

2. Carefully place the insert (p) in the recesses (o).

3. Mount the cover plate and tighten the

knurled nuts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW 685 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 4,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW 685 Manual

Product: