Manual DeWalt DW 621 (page 31 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

78334

Zoom out

Zoom in

1/132

ENGLISH

1. Switching on: press and hold down the switch

(bb) to unlock the tool and subsequently

squeeze the trigger (cc).

2. For continuous operation, press the switch

(bb) again.

3. Switching off: squeeze the trigger (cc) again.

WARNING: Loosen the plunge limiter

and allow the router carriage to regain

its rest position before switching off.

Using the Guide Bushes (ﬁ g. 7)

1. Secure the template to the workpiece using end

clamps.

2. Select and install an appropriate guide bush (z).

3. Subtract the diameter of the cutter from the

outside diameter of the guide bush and divide

by 2. This is the difference between template

and workpiece.

WARNING: If the workpiece is not thick

enough, place it on a piece of waste

wood.

Guiding Off a Batten

Where an edge guide cannot be used, it is also

possible to guide the router along a batten clamped

across the workpiece (with an overhang at

both ends).

Freehand Routing

Your router can also be used without any sort of

guide, e.g. for signwriting or creative work.

WARNING: Make shallow cuts only!

Use cutters with a max. diameter of

8 mm.

Routing with Pilot Cutters (ﬁ g. 2)

Where a parallel guide or guide bush are

inappropriate, it is possible to use pilot cutters (dd)

for cutting shaped edges.

Consult your dealer for further information on the

appropriate accessories.

These include collets (6–12 mm), a depth stop

for use in inverted position, finger jointing tools

for dovetail and finger jointing jigs, dowel jointing

templates, guide bushes (17–40 mm) and guide rails

in various lengths.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

Cleaning the Dust Extraction

Column (ﬁ g. 10)

1. Remove the dust extraction plug or adaptor.

2. Remove the four screws (ee) in the bottom of

the router base (j).

3. Clean the dust extraction column.

4. Reassemble the parts in reverse order.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of

the main housing with dry air as often as

dirt is seen collecting in and around the

air vents. Wear approved eye protection

and approved dust mask when

performing this procedure.

WARNING: Never use solvents or

other harsh chemicals for cleaning the

non-metallic parts of the tool. These

chemicals may weaken the materials

used in these parts. Use a cloth

dampened only with water and mild

soap. Never let any liquid get inside the

tool; never immerse any part of the tool

into a liquid.

Optional Accessories

WARNING: Since accessories, other

than those offered by D

EWALT, have

not been tested with this product, use

of such accessories with this tool could

be hazardous. To reduce the risk of

injury, only DEWALT, recommended

accessories should be used with this

product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW 621 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 2,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DW 621 Manual

Product: