Manual DeWalt DCMWSP564 (page 41 of 168) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

790949

Zoom out

Zoom in

1/168

ENGLISH

Blade Sharpening

KEEP BLADE SHARP FOR BEST MOWER PERFORMANCE. A DULL

BLADE DOES NOT CUT GRASSCLEANLY.

WARNING: Use gloves and proper eye protection while

removing, sharpening, and installing blade. Ensure that

safety key and battery pack areremoved.

Sharpening the blade twice during a mowing season is usually

sufficient under normal circumstances. Sand causes the blade

to dull quickly. If your lawn has sandy soil, more frequent

sharpening may berequired. REPLACE BENT OR DAMAGED

BLADEIMMEDIATELY.

When Sharpening the Blade:

• Make sure blade remainsbalanced.

• Sharpen blade at the original cuttingangle.

Removing and Installing Blade (Fig. M, N)

DANGER: RISK OF INJURY. WHEN REASSEMBLING THE

BLADE SYSTEM, ENSURE EACH PART IS REINSTALLED

CORRECTLY, AS DESCRIBED BELOW. IMPROPER ASSEMBLY

OF THE BLADE OR OTHER PARTS OF THE BLADE SYSTEM

MAY CAUSE SERIOUSINJURY.

DANGER: To reduce the risk of serious personal

injury, turn unit off, remove safety key and battery

packs before making any adjustments or removing/

installing attachments or accessories. An accidental

start-up can causeinjury.

Replacement blades are available from your nearest

authorized servicecenter.

This mower requires replacement

blade

DT20682.

1. Cut a piece of 2" x 4" wood29 (about 2feet long)

(610mm) to keep blade from turning when removing the

blade bolt 30.

WARNING: Use gloves and proper eye protection. Turn the

mower on its side. Be careful of sharp edges of blade.

2. Position wood and unscrew the blade bolt counterclockwise

with a 5/8" wrench31 (not included) as shownin Fig.N.

3. Remove blade bolt spring plate 32 and blade 33 as

shown in Fig. M. Examine all pieces for damage and replace

ifnecessary.

4. Install sharpened or new bladeon shoulder of the blade

adapter34 as shown in Fig.M. Blade has a winged cut out

which must match and engage the same shaped projection

on the bladeadapter.

NOTE: When replacing sharpened or new blade on shoulderof

blade adapter make sure the bottom of the blade as marked

BOTTOM will be facing the ground when the mower is returned

to its normal uprightposition.

5. Install the spring plate on the blade. Be sure to align the

bosses on the spring plate with the detents in the blade,

rotating the blade and spring plate together asnecessary.

6. Position piece of wood to keep blade from turning as shown

in Fig. N. Install blade bolt and securely tighten the blade

with a 5/8"wrench.

MAINTENANCE

Your power tool has been designed to operate over a long

period of time with a minimum of maintenance. Continuous

satisfactory operation depends upon proper tool care and

regularcleaning.

WARNING: To reduce the risk of serious personal

injury, turn tool off and disconnect battery pack

before making any adjustments or removing/

installing attachments or accessories. An accidental

start-up can causeinjury.

The charger and battery pack are notserviceable.

Storage (Fig. C, D)

DANGER: Rotating blade can cause serious injury.

Release bail handle to turn mower off, remove safety key,

and remove battery packs before lifting, transporting, or

storing the mower. Store in a dryplace.

CAUTION: Pinch point. To avoid being pinched, keep

fingers away from area around handle brackets when

folding downhandles.

The handle of the mower can be easily folded down for quick

and convenientstorage.

1. On the lower handle, twist the handle lock knobs7 a

quarterturn.

2. Rotate the handle towards the front of themower. Take care

to not pinch or stress thecord.

3. Twist the handle lock knobs7 a quarter turn to lock the

handle into storage

position.

4. The mower can be stored standing up, with the collection

bag removed, or flat on itswheels.

Mower Overload

To prevent damage due to overload conditions, do not try to

remove too much grass at one time. Slow down your cutting

pace, or raise the cutheight.

NOTE: When you turn off the self drive, for example at the end

of a row, the wheels may become temporarily locked if you pull

backwards on the mower. Simply push ahead slightly and then

move the mower asrequired.

NOTE: During cutting, at times it may be easier to maneuver

around an object , such as a tree or plants, with the self drive off.

The mower can easily be used with the self driveoff.

Variable Speed Ajustment Wheel (Fig.L)

Your mower is equipped with a variable speed adjustment

wheel36 located on the bottom of self drive housing28.

This system adjusts how quickly or slowly the self drive system

propells themower.

1. To increase the speed of the self drive system, rotate the

variable speed adjustment wheel36 in the direction

indicated by the arrow located next to the variable speed

adjustment wheel36.

2. To decrease the speed of the self drive system, rotate the

variable speed adjustment wheel36 in the opposite

direction indicated by the arrow located next to the variable

speed adjustment wheel36.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCMWSP564 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12.84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DCMWSP564 Manual

Product: