Manual DeWalt DCE085R (page 8 of 112) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

790837

Zoom out

Zoom in

1/112

GB Charging the DeWALT Li-ion Battery

1. If the 10.8V MAX Li-ion battery pack is attached to the

laser, remove it (Figure D).

• Rotate the laser so it is easier to access the battery pack

(Figure D #1).

• While pressing down on the release button on the battery

pack (Figure D #2), pull the battery pack up to unlock it

from the laser (Figure D #3).

• Pull the battery pack the rest of the way up and out of the

laser (Figure D #4).

2. Plug the charger cord into an electrical outlet.

3. Slide the battery pack into the charger until it snaps in place

(Figure F #1). On the charger, the left indicator light will

flash to let you know the battery is being charged (Figure

F #2).

4. After the battery is fully-charged (the indicator light on the

charger no longer flashes), press and hold the release

button on the battery pack (Figure F #3) and slide the

pack out of the charger (Figure F #4).

5. Slide the battery pack down in the laser until it snaps in

place (Figure F #5).

Installing New AA Batteries

CAUTION:

The AA Starter Pack is designed specically for use

with DeWALT 10.8V compatible laser products and

cannot be used with any other tools. Do not attempt

to modify the product.

1. If the AA Starter Pack is attached to the laser, remove it

(Figure D).

• Rotate the laser so it is easier to access the Starter Pack

(Figure D #1).

• While pressing down on the release button on the Starter

Pack (Figure D #2), pull the Starter Pack up to unlock it

from the laser (Figure D #3).

• Pull the Starter Pack the rest of the way up and out of the

laser (Figure D #4).

2. On the AA Starter Pack, lift up the latch to open the battery

compartment cover (Figure E #1 and #2).

3. Insert four new, high-quality, name brand AA batteries,

making sure to position the - and + ends of each battery as

noted inside the battery compartment (Figure E #3).

4. Push the battery compartment cover down until it snaps in

place.

5. Slide the Starter Pack down in the laser until it snaps in

place (Figure E #4).

Viewing the Battery Meter on the Keypad

When the laser is ON, the battery meter on the keypad (Figure

A #3) indicates how much power remains. Each of the four

LEDs on the battery meter represents 25% of the power.

• The bottom LED will illuminate and ash when the battery

level is low (below 12.5%). The laser may continue to operate

for a short time while the battery power continues to drain,

but the beam(s) will quickly dim.

• After fresh batteries are installed in the AA Starter Pack, or

the 10.8V Li-ion battery is charged, and the laser is turned

ON again, the laser beam(s) will return to full brightness and

the battery indicator level will indicate full capacity.

• If all 4 LEDs on the battery meter remain ON, this indicates

that the laser is not fully powered OFF. When the laser is not

in use, make sure the Power/Transport Lock switch is placed

to the LEFT to the Locked/OFF position (Figure A #1a).

Turning the Laser On

1. Place the laser on a smooth, flat surface.

2. Slide the Power/Transport Lock switch to the right to the

Unlocked/ON position (Figure A #1b).

3. Press the button on the keypad (Figure A #3) to test each

laser beam setting.

• Press once to display dots above, ahead, and below

the laser (Figure A #3a).

• Press a second time to display two additional dots

from either side of the laser (Figure A #3b).

• Press a third time to stop displaying dots.

4. Check the laser beams. The laser is designed to self-level.

If the laser is tilted so much that it cannot self-level (> 4°),

the laser beam will flash.

• If the laser is tilted between 4° and 10°, the beams will

flash constantly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DCE085R in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DCE085R Manual

Product: