546380
40
Zoom out
Zoom in
Previous page
1/176
Next page
38
ENGLISH
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the
plug.
Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made
to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
(see technical data). The minimum conductor size
is 1 mm
2
; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENT
WARNING: Prior to assembly and
adjustment, always remove the battery
pack.
WARNING: Always switch off the tool
before inserting or removing the battery
pack.
WARNING: Use only D E WALT battery
packs and chargers.
Fitting and Removing the Battery Pack ( g. A)
To fi t the battery pack (11), line it up with the
receptacle on the tool. Slide the battery pack into
the receptacle and push until the battery snaps
into place.
To remove the battery pack, push the release
button (12) while at the same time pulling the
battery pack out of the receptacle.
Fitting and removing a saw blade ( g. C)
The tool-free blade exchange system ensures
quick and easy changing of saw blades.
Open the blade holder (6) by fully retracting the
blade latch (4).
Insert the saw blade into the blade holder (6)
guiding the back of the blade into the groove of
the guide roller (7).
Release the blade latch (4).
To remove the saw blade, fully retract the blade
latch and pull the blade out of the holder.
Saw blades
Blade type Applications
Fine-toothed cutting blade for smooth straight cuts
Coarse-toothed cutting blade for fast straight cuts
Metal cutting blade for ferrous and
non-ferrous metals
Flush cutting blade
1)
for nishing off cuts
up to a wall or edge.
1)
Not available in all countries.
A wide variety of dedicated saw blades is available
as an option.
WARNING: Always select your saw
blade with great care.
Setting the bevel angle ( g. D)
The adjustable shoe (8) allows cutting of LH and
RH bevel angles up to 45°. The bevel scale has
preset positions at 0°, 15°, 30° and 45°.
Release the shoe lever (10).
Slide the shoe (8) toward the saw blade.
Tilt the shoe and set the desired bevel angle
using the scale.
Tighten the shoe lever.
Setting the pendulum stroke ( g. A)
The adjustable pendulum stroke guarantees a
perfect cutting stroke for different materials.
Slide the selector (9) to the desired position
referring to the table below. The selector can be
manipulated during operation.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DC308K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DC308K in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info