Manual DeWalt DC308K (page 41 of 176) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

546380

Zoom out

Zoom in

1/176

ENGLISH

Pos. Wood Metal Plastics

3 Fast cuts - PVC

2 Thick workpieces - Fibreglass

Acrylic

1 Plywood Aluminium -

Chipboard Non-ferrous -

0 Thin workpieces Sheet metal -

Fine cuts

Setting the sawdust blower (ﬁ g. A)

The sawdust blower conducts an adjustable

stream of air to the saw blade to keep the

workpiece clear of sawdust during operation.

• Set the sawdust blower using the lever (3).

- Low For working with metals, when

using coolants and lubricants

and for use with dust extraction.

- Intermediate For working with wood and

similar materials in low speed.

- High For working with wood and

similar materials in high speed.

Mounting the plastic anti-scratch shoe cover

(ﬁ g. E)

The anti-scratch shoe cover (16) reduces damage

to the surface of (sensitive) workpieces.

• Click the cover onto the shoe as shown.

Mounting and removing the anti-splinter shoe

insert (ﬁ g. F1 & F2)

The anti-splinter shoe insert (17) which ﬁ ts close to

the saw blade reduces splintering of the workpiece.

The insert can be mounted both into the shoe and

the shoe cover.

• Hold the insert (17) in the orientation as shown.

• To mount the insert into the shoe (8):

– Slide the edges (18) into the grooves (19).

– Slide the insert back into position against the

shoe.

• To mount the insert into the cover (16):

– Slide the edges (18) behind the ribs (20).

– Push the front end of the insert towards the

cover. The insert snaps into place.

• To remove the anti-splinter shoe insert do the

above process in reverse order.

Dust extraction (ﬁ g. G)

The dust extraction adaptor (21) in combination with

the dust extraction shroud (22) helps extracting the

dust from the workpiece surface, when connected

to a suitable dust extraction system.

• Place the dust extraction shroud (22) onto the

ﬁ nger guard (5) until it clicks in place.

• Fit the dust extraction adaptor (21) to the tool

as shown.

• Connect the hose of a suitable dust extraction

system to the adaptor.

WARNING: Inhalation of dust

developed when sawing wood presents

a serious health hazard. Always

connect a dust extraction system

designed in compliance with the

applicable directives regarding dust

emission.

Preferably wear a dust mask.

WARNING: Do not use a dust extraction

system without proper spark protection

when sawing metal.

Prior to operation

• Make sure your battery pack is (fully) charged.

• Make sure the battery pack is properly seated.

OPERATION

Instructions for use

WARNING:

• Always observe the safety instructions

and applicable regulations.

• Make sure your workpiece is well secured.

Remove nails, screws and other

fasteners that may damage the blade.

• Check that there is sufﬁ cient space for

the blade underneath the workpiece.

Do not cut materials that are thicker

than the maximum cutting depth.

• Use sharp saw blades only. Damaged

or bent saw blades must be removed

immediately.

• Do not use the tool for sawing pipes or

tubes.

• Never run your tool without a saw blade.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DC308K in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DC308K Manual

Product: