Manual DeWalt dc 415 kl (page 37 of 180) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

391299

Zoom out

Zoom in

1/180

ENGLISH

disc causing an uncontrolled cut-off tool to

lift up and out of the workpiece toward the

operator.

• When the wheel is pinched or bound tightly by

the workpiece, the wheel stalls and the motor

reaction drives the unit rapidly back toward or

away from the operator.

• Kickback is the result of tool misuse and/or

incorrect operating procedures or conditions

and can be avoided by taking proper

precautions as given below:

• Maintain a firm grip with both hands on the

unit and position your body and arm to allow

you to resist kickback forces. Kickback forces

can be controlled by the operator, if proper

precautions are taken.

• When wheel is binding, or when interrupting

a cut for any reason, release the trigger and

hold the unit motionless in the material until

the wheel comes to a complete stop. Never

attempt to remove the unit from the work

or pull the unit backward while the wheel is

in motion or kickback may occur. Investigate

and take corrective actions to eliminate the

cause of wheel binding.

• When restarting a cut-off tool in the

workpiece, check that the wheel is not

engaged into the material. If wheel is binding,

it may walk up or kickback from the workpiece

as the tool is restarted.

• Support large panels to minimize the risk of

wheel pinching and kickback. Large panels

tend to sag under their own weight. Support

must be placed under the panel on both sides,

near the line of cut and near the edge of the

panel.

Package contents

The package contains:

1 Angle grinder

1 Type 27 guard

1 Anti vibration side handle

1 Flange set

1 Two-pin spanner

2 Battery packs (DC413KL/DC415KL)

1 Battery charger (DC413KL/DC415KL)

1 Kit box (DC413KL/DC415KL)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

INTENDED USE

Your DC413/DC415 grinders are designed for

professional applications. DO NOT use under humid

conditions or in presence of flammable liquids or

gases.

DO NOT use grinding wheels other than center

depressed wheels and flap-disc.

These heavy-duty angle grinders are professional

power tools. DO NOT let children come into

contact with the tool. Supervision is required when

inexperienced operators use this tool.

a. Trigger switch

b. Lock-Off Button

c. Spindle lock button

d. Side handle

e. Abrasive wheel

f. Anti-lockup backing flange

g. Threaded clamp nut

h. Type 27 guard

i. Battery pack

j. Battery release button

Charger

Your DE9000 charger accepts DEWALT

Li-Ion battery packs of 36 V (DE9360) and

28 V (DE9280) at 2.2 Ah.

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the battery pack

voltage corresponds to the voltage on the rating

plate. Also make sure that the voltage of your

charger corresponds to that of your mains.

Your DEWALT charger is double insulated

in accordance with EN 60335.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt dc 415 kl in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 5,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt dc 415 kl Manual

Product: