Manual DeWalt DC 228 (page 47 of 204) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79260

Zoom out

Zoom in

1/204

ENGLISH

Switching On and Off (ﬁ g. A)

• To run the tool, press the variable speed switch

(1). The pressure exerted on the variable speed

switch determines the tool speed.

• To stop the tool, release the switch.

• To lock the tool in off position, move the

forward/reverse slider (2) to the central position.

Hammerdrilling (ﬁ g. A)

• Set the mode selector switch (3) to the

"hammerdrilling" position.

• Insert the appropriate drill bit. For best results

use high quality carbide-tipped bits.

• Adjust the side handle (9) as required.

• If necessary, set the drilling depth.

• Mark the spot where the hole is to be drilled.

• Place the drill bit on the spot and switch on the

tool.

Rotary Drilling (ﬁ g. A)

• Set the mode selector switch (3) to the "rotary

drilling" position.

• Depending on your tool, follow either of the

following instructions:

- Fit a chuck adaptor/chuck assembly (DC228,

DC232). Special SDS Plus adaptors with

threaded sections are available for use with

standard 10 or 13 mm chucks to enable

straight shank bits to be used.

- Replace the tool holder with the chuck

(DC229, DC234).

• Proceed as described for hammerdrilling.

CAUTION: Never use standard chucks

in the hammerdrilling mode.

Screwdriving (ﬁ g. A)

• Set the mode selector switch (3) to the "rotary

drilling" position.

• Select the direction of rotation.

• Depending on your tool, follow either of the

following instructions:

- Insert the special SDS Plus

screwdriving

adaptor for use with hexagonal screwdriver bits

(DC228, DC232).

- Replace the tool holder with the chuck

(DC229, DC234).

• Insert the appropriate screwdriver bit. When

driving slotted head screws always use bits with

a ﬁ nder sleeve.

• Gently press the variable speed switch (1) to

prevent damage to the screw head. In reverse

(LH) rotation the tool speed is automatically

reduced for easy screw removal.

• When the screw is ﬂ ush with the workpiece,

release the variable speed switch to prevent the

screw head from penetrating into the workpiece.

DC228, DC229, DC234 - Chipping (ﬁ g. A)

• Set the mode selector switch (3) to the

"hammering only" position.

• Insert the appropriate chisel and check if it is

properly locked.

• Adjust the side handle (9) as required.

• Switch on the tool and start working.

It may be necessary to brieﬂ y run the motor after

having changed from chiselling to rotary modes in

order to align the gears.

WARNING:

• Do not use this tool to mix or pump

easily combustible or explosive ﬂ uids

(benzine, alcohol, etc.).

• Do not mix or stir inﬂ ammable liquids

labelled accordingly.

Optional Accessories

WARNING: Since accessories, other

than those offered by D

EWALT, have

not been tested with this product, use

of such accessories with this tool could

be hazardous. To reduce the risk of

injury, only D

EWALT, recommended

accessories should be used with this

product.

Various types of SDS Plus

drill bits and chisels

are available as an option.

Consult your dealer for further information on the

appropriate accessories.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DC 228 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt DC 228

DeWalt DC 228 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 168 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DC 228 Manual

Product: