546481

DeWalt D51850 Manual

28
Zoom out
Zoom in
Previous page
1/144
Next page
ENGLISH
26
Safety Instructions
When using tools, always observe the safety
regulations applicable in your country to reduce
the risk of personal injury. Read the following safety
instructions before attempting to operate this
product.
Keep these instructions in a safe place!
READ ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS
General
1. Keep work area clean.
Cluttered areas and benches can cause
accidents.
2. Consider work area environment.
Do not expose tools to humidity. Keep work
area well lit. Do not use tools in the presence of
flammable liquids or gases.
3. Keep children away.
Do not let children or visitors come into contact
with the tool. Supervision is required for those
under 16 years of age.
4. Store idle tools.
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
5. Dress properly.
Do not wear loose clothing or jewellery. They
can be caught in moving parts. Preferably wear
rubber gloves and non-slip safety footwear.
Wear protective hair covering to keep long hair
out of the way.
6. Do not overreach.
Keep proper footing and balance at all times.
7. Stay alert.
Watch what you are doing. Use common
sense. Do not operate the tool when you are
tired.
8. Use appropriate tool.
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which
it was intended.
WARNING! The use of any accessory or
attachment or performance of any operation
with this tool, other than those recommended
in this instruction manual may present a risk of
personal injury.
9. Maintain tools with care.
Keep the tools in good condition and clean
for better and safer performance. Follow the
instructions for maintenance and changing
accessories. Keep all controls dry, clean and
free from oil and grease.
10. Check for damaged parts.
Before using the tool, carefully check it for
damage to ensure that it will operate properly
and perform its intended function. Check for
misalignment and seizure of moving parts,
breakage of parts and any other conditions that
may affect its operation. Have damaged guards
or other defective parts repaired or replaced as
instructed.
11. Have your tool repaired by an authorized
DEWALT repair agent.
This tool is in accordance with the relevant
safety regulations. To avoid danger, tools must
only be repaired by qualified technicians.
Additional Safety Instructions for
Pneumatic Nailers
• ALWAYS wear safety glasses.
• ALWAYS wear ear protection.
• Only use fasteners of the type specified in
the manual.
• Do not use any stands for mounting the tool to
a support.
• NEVER use the tool for any other purpose than
specified in this manual.
• NEVER use this tool on scaffolds, stairs,
ladders or similar workplaces.
• Don’t use the tool to close cases or crates.
• Don’t use the tool for attaching transportation
safety devices e.g. on vehicles and carriages.
• Before use check proper function of contact
trip. Never use this tool when either trigger
switch or contact trip is damaged.
• Use quick-action couplings for connection to
the compressed air system. The non-sealable
nipple must be fitted to the tool in such a way
that no compressed air remains in the tool after
disconnection.
• ALWAYS use clean, dry compressed air. Do not
use oxygen or combustible gases as an energy
source for this tool.
• The maximum allowable air pressure of the tool
shall NEVER be exceeded.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D51850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D51850 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info