548811

DeWalt D28886 T 1 Manual

21
Zoom out
Zoom in
Previous page
1/80
Next page
21
ENGLISH
• Securely tighten the collet using the 19 mm
spanner provided.
• Release the spindle lock.
• To remove the accessory, proceed in reverse
order.
Always mount the accessory with the
required length X of the shank inserted in
the collet (fig. D).
Never tighten the collet nut without an
accessory in the collet.
D28886 - Setting the electronic speed control
dial (fig. A)
The speed is infinitely variable from 7,
000 - 27,000
min
-1
using the electronic speed control dial (5).
• Turn the electronic speed control dial to the
required level. The correct setting, however, is a
matter of experience.
• Generally, harder materials require a higher setting.
Instructions for use
Always observe the safety instructions
and applicable regulations.
Ensure all materials to be ground or cut are secured
in place.
Apply only a gentle pressure to the tool.
Avoid overloading. Should the tool become hot, let it
run a few minutes under no load condition.
Prior to operation:
• Install the appropriate accessory. Do not use
excessively worn accessories.
Switching on and off (fig. A)
• To run the tool, press the on/off switch (1) to the
front.
• For continuous operation, press down the front
end of the switch.
• To stop the tool, release the on/off switch.
• To stop the tool in continuous operation,
press the rear end of the on/off switch.
Holding the tool
• Always hold the tool with both hands.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized DEWALT repair
agent where it will be disposed of in an
environmentally safe way.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D28886 T 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D28886 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt D28886 T 1

DeWalt D28886 T 1 Additional guide - Polish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info