Manual DeWalt D28886 T 1 (page 19 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

548811

Zoom out

Zoom in

1/80

ENGLISH

17 Do not abuse cord

Never carry the tool by its cord. Never pull the

cord to disconnect from the socket. Keep the

cord away from heat, oil and sharp edges.

18 Store idle tools

When not in use, tools must be stored in a dry

place and locked up securely, out of reach of

children.

19 Maintain tools with care

Keep the tools in good condition and clean for

better and safer performance. Follow the

instructions for maintenance and changing

accessories. Keep all handles and switches dry,

clean and free from oil and grease.

20 Repairs

This tool is in accordance with the relevant safety

regulations. Have your tool repaired by an

authorised DEWALT repair agent. Repairs should

only be carried out by qualified persons using

original spare parts; otherwise this may result in

considerable danger to the user.

Additional safety rules for grinders

• Your grinder has been designed for grinding and

cutting masonry and steel.

Do not cut or grind light metal with a

magnesium content exceeding 80%

since this type of metal is flammable.

• The max. allowable speed of the grinding wheel

or cutting accessory, or any other suitable

accessory, must always be equal to or greater

than the no-load speed of the tool specified on

the nameplate.

• Do not cut workpieces requiring a maximum depth

of cut exceeding that of the cutting accessory.

• Always use accessories with a shank diameter

corresponding to the size of the collet installed in

your tool.

• Do not use grinding and cutting accessories that

do not conform to the dimensions stated in the

technical data.

• Inspect grinding and cutting accessories before

each use. Do not use chipped, cracked or

otherwise defective accessories.

• Ensure that the grinding or cutting accessory is

mounted correctly before use.

• Let the tool run at no-load in a safe position for at

least 30 seconds.

If there is a considerable vibration or if any other

defect occurs, stop the tool and check it to

determine the cause.

• Check that the workpiece is properly supported.

• Do not operate this tool without the switch guard

in place.

• Do not operate the tool near flammable liquids,

gases or dust. Sparks or hot chips from cutting

or arcing motor brushes may ignite combustible

materials.

• Do not operate the tool while standing in line with

the accessory. Keep other persons away from

the work area.

• Do not use cutting discs for side grinding.

• Do not operate the spindle lock while the tool is

running.

• Beware that after switching off the tool the wheel

continues to rotate for a short period.

• Always store grinding and cutting accessories in

a dry place.

Package contents

The package contains:

1 Straight grinder

1 Spanner (13 mm) (D28885)

1 Spanner (19 mm)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your straight grinder D28885/D28886 has been

developed for professional grinding and cutting

applications.

1 On/off switch

2 Switch guard

3 Spindle lock (D28886)

4 Collet nut

5 Speed control dial (D28886)

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D28886 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeWalt D28886 T 1

DeWalt D28886 T 1 Additional guide - Polish - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D28886 T 1 Manual

Product: