723581

DeWalt D25651 Manual

8
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH
6
Fig. D
13 16
Two-Stage Clutch/E-ClutchTM (Fig. E)
NOTICE: Always turn the tool off before changing
torque control settings or damage to tool mayresult.
Two-stage clutch
D25603, D25651
Clutch Setting 1 14  is designed for most hammerdrilling
applications and is designed to easily clutch out when the
drill bit encounters re-bar or other foreignsubstances.
Clutch Setting 2 11  is designed for higher torque
applications such as core-bits and deep hole hammerdrilling
and is designed to clutch out at a higher torquethreshold.
Move the torque control lever 8  to Clutch Setting 1 or 2 as
needed forapplication.
NOTE: Allow the motor housing to rotate a little while
changingtorque.
NOTE: If it is not possible to select Clutch Setting 2, run the
unit under load and tryagain.
Each time the tool is plugged in, it will automatically default
to Clutch Setting 1, the most sensitivesetting.
E-CLUTCH™
D25603
In addition, E-Clutch™ offers increased user comfort and
safety through an on-board antirotation technology capable
of detecting if the user loses control of the hammer. When a
jam is detected, the torque and speed are reduced instantly.
The red indicator LED 9  illuminates when the E-Clutch™
isengaged.
14
11
8
7
9
10
Fig. E
Electronic Speed and Impact Control
(Fig. E)
D25651, D25601, D25603, D25831,
D25851
The electronic speed and impact control allows the
use of smaller drill bits without the risk of bit breakage,
hammerdrilling into light and brittle materials without
shattering and optimal tool control for precisechipping.
To set the control dial, turn the dial7 to the desired level.
The higher the number, the greater the speed and impact
energy. Dial settings make the tool extremely adaptable for
many different appli cations. The required setting depends
on the bit size and hardness of material beingdrilled.
Mode Selector (Fig. A)
NOTICE: Never change the mode while the unit is
running. Tool must come to a complete stop before
activating the mode selector button or damage to the
tool mayresult.
CAUTION: Do not change to hammerdrill mode with
chisel bit in tool holder. Personal injury and damage
to tool mayresult.
The D25501, D25553, D25601, D25603, and D25651 use
two operating modes. To select the required operating
mode, rotate the mode selector6 until the arrow points to
the hammerdrilling or the chipping icon. The D25831 and
D25851 use only the chippingmode.
Hammerdrilling Mode ( )
D25501, D25553, D25601, D25603,
D25651
The tool simultaneously rotates and impacts the
work. This mode is appropriate for all concrete and
masonryoperations.
Chipping Mode ( )
D25831, D25851
The spindle lock is engaged during chipping mode
so the tool impacts the work without rotating. This
mode is appropriate for light chipping, chiseling and
demolitionapplications.
NOTE: In chipping mode, the hammerdrill can also be used
as a lever to free a jammed drillbit.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D25651 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D25651 in the language / languages: English, French, Spanish, All languages as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info