Manual DeWalt D25601K (page 38 of 160) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544648

Zoom out

Zoom in

1/160

ENGLISH

4. D25601, D25602, D25603 only: Turn the

electronic speed and impact control dial (g) to a

medium or high speed setting.

5. Fit and adjust the side handle (c).

6. Place the centerdrill on the spot and switch on

the tool. Drill until the core penetrates into the

concrete approximately 1 cm.

7. Stop the tool and remove the centerdrill. Place

the core bit back into the hole and continue

drilling.

8. When drilling through a structure thicker than

the depth of the core bit, break away the round

cylinder of concrete or core inside the bit at

regular intervals.

To avoid unwanted breaking away of concrete

around the hole, first drill a hole the diameter of

the centerdrill completely through the structure.

Then drill the cored hole halfway from each side.

9. Always turn the tool off when work is finished

and before unplugging.

Chipping and Chiselling (ﬁ g. 1)

D25501, D25601, D25602, D25603, D25820, D25831

1. Insert the appropriate chisel and rotate it by

hand to lock it into one of 18 positions.

2. Set the mode selector switch (f) to the

hammering only position.

3. D25601, D25602, D25603, D25831 only: Set

the electronic speed and impact control dial(g).

4. Fit and adjust the side handle (c).

5. Turn the tool on and start working.

6. Always turn the tool off when work is finished

and before unplugging.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

This machine is not user-serviceable. Take the

tool to an authorised D

EWALT repair agent after

approximately 150 hours of use. If problems occur

before this time, contact an authorised DEWALT

repair agent.

Brushes (ﬁ g. 3)

The carbon brushes are not user-serviceable. Take

the tool to an authorized DEWALT repair agent.

The yellow brushwear indicator LED (q) lights up

when the carbon brushes are nearly worn out. After

a further 8 hours of use or after the brushes have

completely worn out, the motor will automatically be

shut off.

Tool maintenance needs to be carried out as soon

as the service indicator (r) lights up.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of

the main housing with dry air as often as

dirt is seen collecting in and around the

air vents. Wear approved eye protection

and approved dust mask when

performing this procedure.

WARNING: Never use solvents or

other harsh chemicals for cleaning the

non-metallic parts of the tool. These

chemicals may weaken the materials

used in these parts. Use a cloth

dampened only with water and mild

soap. Never let any liquid get inside the

tool; never immerse any part of the tool

into a liquid.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have

not been tested with this product, use

of such accessories with this tool could

be hazardous. To reduce the risk of

injury, only DEWALT, recommended

accessories should be used with this

product.

Various types of SDS Max

drill bits and chisels are

available as an option.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D25601K in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D25601K Manual

Product: