Manual DeWalt D21583K (page 37 of 172) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544690

Zoom out

Zoom in

1/172

ENGLISH

• Always use a water cooling device and a

water collection system.

• Always use core bits designed for wet drilling.

• Do not use the machine handheld with core

bits larger than 40 mm.

• Always mount the drill on a stand when

drilling holes larger than 40 mm.

• The maximum water pressure is 3 bar. Use

a pressure relieve valve in case of a higher

water pressure.

• Use only pure tap water for cooling

purposes.

• Prevent water from entering the motor or

other electrical components. Make sure the

PRCD is not in contact with water.

Safe Operation for Stationary Stands

• A machine incorrectly assembled may

cause a hazardous situation. Carefully fix the

machine into the drill stand and check that

the drill stand holder is secured.

• Fixing the drill stand with vacuum device can

lead to dangerous situations.

• Check the surface where the drill stand shall

be fixed. surface such as irregular (rough) can

significantly reduce the effectiveness of the

suction system. Coated or laminated surface

can be pulled off during work.

• The minimum vacuum level shall not be lower

than 600mbar. Periodically control this value

on the pressure gauge.

• Do not use drill core bits with a diameter

greater than 70mm at this application.

Additional Instructions for Use in

Stationary Position

SAFETY PRECAUTIONS

• Hazardous situation due to broken parts.

Always check the core bits before using.

Never use deformed or damaged drill core

bits.

• Use of non-recommended cutting tools,

which can lead to injuries due to the loss

of control. Use only core bits which are

designed for this tool and consider the

minimum and maximum diameter and length

of those core bits.

• Incorrect clamping and positioning of the

core bit may lead to dangerous situation by

broken and ejected parts of the drill core bit.

Ensure that the drill core bit is assembled and

adjusted correctly. Tighten the core bit with

sufficient fastening torque.

• Always wear suitable protective equipment

(PPE) such as:

• Hearing protection, to reduce the risk of

induced hearing loss

• Gloves, when handling core bits or rough

material, to reduce injuries by sharp edges

• Safety glasses, to prevent injuries by flying

particles

• Non-slipping footwear, to prevent injuries

caused by slippery surfaces

• Hazardous situation due to dust production

when drilling without water supply. Use a

dust extraction device, if any, or at least a

dust mask.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing

– Risk of personal injury due flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

The following factors increase the risk of breathing

problems:

– No dust extractor connected when performing

dry operation

– Insufficient dust extraction caused by uncleand

exhaust filters

Markings on Tool

The following pictograms are shown on the tool:

Safe use warning

Read instruction manual

before use

Wear ear protection

Wear eye protection

Always wear a dust mask

Always wear safety shoes

Always wear safety gloves.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D21583K in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt D21583K Manual

Product: