110214
36
Zoom out
Zoom in
Previous page
1/140
Next page
ENGLISH
34
MOUNTING
1. Slacken the locking screw (v) as to allow the
parallel fence to pass.
2. Insert the parallel fence (o) in the saw shoe (f) as
shown.
3. Tighten the locking screw (v).
ADJUSTING
1. Slacken the locking screw (v) and set the
parallel fence (o) to the desired width.
2. Tighten the locking screw (v).
Prior to Operation
Make sure the guards have been mounted
correctly. The saw blade guard must be in
closed position.
Make sure the saw blade rotates in the direction
of the arrow on the blade.
OPERATION
Instructions for Use
WARNING: Always observe the safety
instructions and applicable regulations.
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories.
WARNING:
Always observe the safety instructions
and applicable regulations.
Ensure the material to be sawn is
firmly secured in place.
Apply only a gentle pressure to the
tool and do not exert side pressure on
the saw blade.
• Avoid overloading.
Do not use excessively worn saw
blades.
• Do not use your saw for pocket cuts.
Proper Hand Position (fi g. 1, 8)
WARNING: To reduce the risk of
serious personal injury, ALWAYS use
proper hand position as shown.
WARNING: To reduce the risk of
serious personal injury, ALWAYS hold
securely in anticipation of a sudden
reaction.
Proper hand position requires one hand on the main
handle (x) with the other hand on the front handle (c).
Switching On and Off (fi g. 1, 2)
For safety reasons the trigger switch (a) of your tool
is equipped with a lock-off button (b).
1. Press the lock-off button to unlock the tool.
2. Press the trigger switch (a) to run the tool.
As soon as the trigger switch is released the
lock-off switch is automatically activated to
prevent unintended starting of the machine.
WARNING:
Do not switch the tool on or off when
the saw blade touches the workpiece
or other materials.
Do not operate the spindle lock while
the tool is running.
Guiding the Tool (fi g. 1, 2)
For optimum results, clamp the workpiece
bottom up.
Follow the line drawn on the workpiece using
the mark (m).
In case of a bevel angle of 45°, follow the line
drawn on the workpiece using the mark (l).
WARNING: ALWAYS lead the cord
away in line with the rear of the tool
Dust Extraction (fi g. 1)
WARNING: Risk of dust inhalation.
To reduce the risk of personal injury,
ALWAYS wear an approved dust mask.
Your tool is fitted with a dust extraction outlet (e).
Whenever possible, connect a dust extraction device
designed in accordance with the relevant regulations
regarding dust emission.
WARNING: ALWAYS use a vacuum
extractor designed in compliance with
the applicable directives regarding dust
emission when sawing wood. Vacuum
hoses of most common vacuum
cleaners will fit directly into the dust
extraction outlet.
WARNING: Do not use a vacuum
extractor without proper spark
protection when sawing metal..
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D 23550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D 23550 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info