531764
113
Zoom out
Zoom in
Previous page
1/145
Next page
112
Brake disk wear
- Measure the thickness of the disks (A) at the point where
they are most worn.
- If the disk is more worn than specified in the service limit,
renew it.
Measurement area (B).
Standard brake disk thickness:
3,80 – 4,10 mm
Service limit:
3,50 mm
Brake disk distortion
- Raise the motorcycle on the jack so that the tyre is clear of
the ground.
- Place a dial calibrator against the disk (A) as shown, and
measure the disk’s deviation from centre as the tyre is turned
(B) by hand.
- If the deviation from centre exceeds the service limit, renew
the disk.
Disk deviation from centre:
Standard:
Inferior a 0,15 mm
Service limit:
0,3 mm
Bleeding the brake system pipe
The brake fluid has a very low compression coefficient, with
the result that almost all the movements of the brake lever
are transmitted directly to the calliper for braking. Air howe-
ver compresses easily. When air enters the brake system pi-
pes, the movement of the brake lever is partially used up in
compressing the air. This causes the pedal to feel spongy and
leads to a loss of braking power.
WARNING
BE SURE TO BLEED AIR OUT OF THE BRAKE SYSTEM WHEN
THE BRAKE LEVER FEELS SPONGY AFTER CHANGING THE
BRAKE FLUID OR WHEN THE BRAKE SYSTEM PIPE HAS BEEN
LOOSENED FOR ANY REASON.
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Derbi GPR 125 cc Racing at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Derbi GPR 125 cc Racing in the language / languages: English as an attachment in your email.

The manual is 6,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info