a) Press MENU to display the setting menu.
b) Press right enter into “system”.
c) Press DOWN to select Date/Time.
d)
Press OK to Display Date/Time Interface, Press UP and DOWN to change the
Value.
e) Press down the select switch to save all current setting, then press MENU to
return to info display.
Press MENU to cancel setting and return to info display.
4.1.11
Set Multi
This parameter affects the number of pictures taken for each triggering in the camera
mode. It has four values: “1 Photo”, “3 Photos” “6 Photos” and “9 photos”. Its default
value is “1 Photo”. The following shows how to set photo burst to 3 Photos, provided
that the previous option is 1 Photo:
a) Press MENU to display the setting menu.
b) Press DOWN to select Multi.
c)
Press OK to select 3 pictures.
d) Press down the select switch to save the current setting, then press MENU to
return to info display.
Press MENU to cancel setting and return to info display.
4.1.12
Set ISO
This menu could only help you get a better photo at night, there are 3 values:
100,200,400.
a) Press MENU to display the setting menu.
b)
Press DOWN to select ISO
c) Press the select switch to save the current setting, then press MENU to return
to info display.
Press MENU to cancel setting and exit.
4.1.13
Set Video Length
The following shows how to set video length to 30 Seconds, provided that the previous
value is 10 Seconds:
a) Press MENU to display the setting menu.
b)
Press down to select Video Length.
c) Press down the select switch to save the current setting, then press MENU to
return to info display.
Press MENU to cancel setting and exit.
4.1.14
Set Video Sound
The following shows how to turn off the sound of the video:
a) Press MENU to display the setting menu.
b) Press DOWN to select Voice.
c)
Press OK to display the VOICE setting Interface.
4.1.15
Set Delay
This parameter means that how long the PIR (Passive Infrared motion sensor) will be
disabled after each triggering in ON mode. During this time the PIR of the device will not
react to the motion of human (or animals). The minimum interval is 1 seconds, it means
the PIR works all the time and media is taken almost continuously. The maximum
interval is 30 minutes, it means the PIR will be disabled for 30 minutes after each
triggering. The default value is 5 seconds.
The following shows how to set PIR Triggering Interval Time as 1 minute provided that
previous option is 5 seconds.
a) Press MENU to display the setting menu.
b) Press DOWN to select Delay.
c)
Press OK to enter in to the interval setting.
d) Press DOWN to select 1 minute.
ENG-10
